How Much Horsepower Did A 351 Cleveland Cobra Jet Have?
It produced 275 hp (205 kW) using the new SAE net system. The Q-code “351 Cobra Jet” version was produced from May 1971 through the 1974 model year.
Did Ford make a 351 Cleveland Cobra Jet?
Q-code (351 Cobra-Jet)
The Q-code 351 “Cobra-Jet” (also called 351-CJ, 351-4V) was produced from May 1971 through the 1974 model year. It was a lower-compression design that included open-chamber 4V heads.
How much HP did a 351 Cleveland have?
Factory rated at 330 hp at 5,400 rpm, this new engine was the highest output that this engine family would see. Other 351 performance engines would follow, but none would match the Boss 351.
How much horsepower does a 1971 351 Cleveland have?
Engine Basics
| Year | 1971 | 1971 Boss |
|---|---|---|
| Displacement | 351 cu / 5.8 liters | 351 cu / 5.8 liters |
| Power (hp) | 240 hp @ 4,600 RPM | 330 hp @ 5,800 RPM |
| Torque (lb/ft) | 355 lb/ft @ 2,600 RPM | 380 lb/ft @ 3,400 RPM |
| Compression | 9.5:1 | 11.0:1 |
What is the best 351 Cleveland block?
It appears the best Cleveland block to use is the D2AE-CA casting—the final evolution of the 351C block before production ended in 1974. Though the Ford Master Parts Catalog indicates the D2AE-CA block is a four-bolt main casting, not all of them were drilled and tapped for four-bolt mains.
How much HP did Cobra Jet have?
335 hp
With the Muscle Car horsepower race escalating for the 1968 season, Ford Motor Company introduced its all-new 428-cubic inch Cobra Jet engine. With 335 hp, the potent 428 CJ offered a huge leap in power over the smaller 390-cube V8, which was the top Mustang engine for 1967.
What makes a Ford engine a Cobra Jet?
In 1968 Ford kept the 428 in the picture but added the Super Cobra Jet option, which upgraded the crankshaft and connecting rods to better handle the stress of regular drag racing punishment.
What makes a 351 Cleveland better than a 351 Windsor?
Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal. The Windsor’s timing chain attaches to the front of the engine and has an external timing cover typically made of cast aluminum.
What was so special about the 351 Cleveland?
The Boss 351 Cleveland was more special than its modest rating suggested. The engine was intended to thrive in the upper RPM range and suck in as much air as its 11.7:1 compression ratio could handle through an aluminum intake and a race-ready rotating assembly.
What’s better 351W or 351C?
“The 351W is a basic 302-type engine. The 351C engine got all the hype, but what we race today is the basic W or a combination of the two. The W is a better engine for long-lived low RPM power. It needs proper preparation to race, and, as it has the better torque curve on the low end, it is not a high rpm engine.
How much HP does a Boss 429 have?
375 HP
The Boss 429 engine used a single Holley four-barrel carburetor rated at 735 CFM mounted on an aluminum intake manifold. All these cars had 4-Speed Manual Transmissions and the Boss was rated very conservatively at 375 HP while actual output was believed to be well over 500 horsepower.
Is 302 block the same as 351 Cleveland?
The main difference between the blocks was the Deck Height . The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine.
How much horsepower does a 84 351 Windsor have?
While the latest generation of 351 Windsors typically generated around 180-220 horsepower from the factory, adding a new set of heads, a larger cam, and some other aftermarket parts can get a Windsor with the stock stroke to around 350-400 horsepower easily.
Can you put a supercharger on a 351 Cleveland?
Complete kit will mount one TorqStorm® Billet Supercharger to the passenger side of a Ford 351 Cleveland.
How much horsepower can a 351 Windsor block take?
Capable of exceeding 700 hp each, we had more than 1,400 hp worth of turbos for the 351W.
How big can you stroke 351 Cleveland?
4.000"
This is the largest stroker combination available for the Ford 351 Cleveland, using a 4.000″ stroke to achieve 408 cubic inches of displacement. This configuration will be more bottom-end heavy than the others, with less emphasis on top-end power.
How fast was a 1969 Cobra Jet?
At a 3,890-pound curb weight (test weight not available), the Cobra ran 0-60 in 5.6 seconds, 14.04 seconds at 100.61 mph in the quarter-mile, and made a panic stop from 80 mph in 248 feet.
How fast does a Cobra Jet go?
Renowned Drag Racer, Bob Tasca III, drove a one-of-a-kind Ford Mustang Cobra Jet 1400 to a quarter-mile time of 8.12 seconds at 171 mph at Summit Motorsports Park in Norwalk, Ohio, shattering the previous record of 8.27 seconds established in its debut last October.
How much horsepower does a 429 Super Cobra Jet have?
370 hp
With a 4.36-inch bore and shorter 3.59-inch stroke than the 460, the 429-cu-in Cobra Jet promised at least 370 hp thanks to its snappy 11.3:1 compression ratio, and it became the go-to power plant for the late-’60s Fords.
How do you identify a Super Cobra Jet engine?
Cobra Jet engines used a special cast-iron head that can be identified with the engineering numbers C8OE-6090-N on the outside as shown here, and with inlet ports for the Thermactor system at each cylinder.
What was Ford’s most powerful engine?
The 2003 and 2004 Mustang SVT Cobra, known as the terminator, has a supercharged four-valve 4.6 that makes a whopping 390 horsepower and 390 lb. -ft. of torque. A Ford 4.6-liter Modular V8 also powered the Koenigsegg CCR, which dethroned the McLaren F1 as the fastest production car in the world.
Contents