What Amp Settings Did Jimi Hendrix Use?

Answer: Jimi Hendrix’s amp settings depended greatly on the song he was performing, but generally, he has the bass at around 4, the mids at 8, the treble at 6, and the gain at 4 or 5.

How do I get the Jimi Hendrix tone on my amp?

A key component to achieving a Hendrix tone is fuzz distortion. Hendrix used a Fuzzface pedal to add more dirt and drive to his amp. Fuzz distortion is very different to typical distortion or overdrive pedals. If you don’t have a fuzz pedal you’ll find it very hard to achieve a decent Jimi Hendrix tone.

What amp did Hendrix use at Woodstock?

Marshall 100W 1959
Jimi used Marshall 100W 1959 JTM100 “Super Lead” amps at Woodstock, each perched atop a 4×12 stack loaded with Celestion Greenbacks. These amps were the 100-watt version of the JTM45.

What amp settings did Eddie Van Halen use?

In summary, the main gear Eddie Van Halen uses and main pedals Eddie used were a phaser, ideally a Phase 90 and a delay pedal, ideally an Echoplex all put through a 5150 amplifier.

What was Kurt Cobain amp settings?

Kurt Cobain used a range of tones depending on the songs he was playing, but generally, he set his amp settings at 7-8 for the treble and mids and the bass around 5. He generally set his distortion high for choruses (8-10) unless a pedal was used.

Did Hendrix Use overdrive?

Jimi Hendrix’s Amps
Preferring to use all of them in unison through multiple Marshall 4×12” cabinets, Hendrix’s live performances were not only notoriously loud, but this huge setup also helped him to form his heavily overdriven sound.

What was Jimi Hendrix favorite amp?

Marshall Super Lead 100
One effect that’s synonymous with Hendrix is his love for amp feedback. He would perform with a row of Marshall Super Lead 100 Watt full-stacks and was estimated to own between 50-100 Marshall amplifiers.

What tuning did Hendrix use?

Eb
Famously Hendrix nearly always tuned every stt on his guitar down by one semitone. This is also sometimes called a down tuned guitar, being downturned to Eb (E flat), or playing in Eb. What it means in practice is that instead of the strings being in standard tuning EADGBe they are Eb, Ab, Db, Gb, Bb, and Eb.

What amp did Clapton use?

It is with Fender amps however that Eric Clapton is best associated. And again, over the last five decades, Clapton has played a wide variety of different Fender amps. However the two that have arguably had the greatest impact on his tone are the Fender ’57 Custom Twin and the Fender ’57 Custom Champ.

What amp was used on brown sugar?

The ’65 Fender Deluxe Reverb amp with Mono Tape Delay.

What amps did Def Leppard use?

Amps and Effects

• Loop 1 – Marshall JMP-1 MIDI preamp.
• Loop 2 – Voodoo Amps VC-2 preamp.
• Loop 3 – Rocktron Intellifex (used only for chorus)

What amps did Chuck Berry use?

Larry had mentioned that when Chuck performed, he always stipulated in his contract that he must be provided two Fender Showman Reverb amps to perform with.

What amp did Stevie Ray use?

The amplifiers he used on stage included: Two “Blackface” Fender Super Reverbs. Marshall Club & Country combo amp with 2×12″ JBL speakers. Two 1964 “Blackface” Fender Vibroverb amplifiers (numbers five and six off production line), each with one 15″ speaker.

What amp settings did Stevie Ray Vaughan use?

Clean Amp Settings

• Presence: 6.
• Treble: 9.
• Mid: 6-8.
• Bass: 5-6.
• Gain: 3.
• Volume: 5.

What amps did Metallica use?

What amps do Metallica use? Metallica are well known for using Mesa/ Boogie amplifiers such as the Mark IIC. James is also known to play the Roland JC-120 for his clean tones. Kirk also has a signature line of amps with Randall.

What amps did Slipknot use?

Marshall JVM205H 50W Valve Amp Head
Mick Thomson relies on his signature Rivera KR7 head. It’s a beast of an amp at 120 watts, voiced for tighter low-end and boosted mids to punch through the many layers of Slipknot’s music.

What distortion did Hendrix use?

Over the course of ’69 & ’70, Jimi Hendrix appeared at his most noted live appearances — Live at Woodstock, Live at Berkeley, and Live at the Fillmore East — using a mysterious red Fuzz Face Distortion with white knobs.

Did Hendrix use octave pedal?

The Octavia was an effects pedal designed for Jimi Hendrix by his sound technician, Roger Mayer. It reproduces the input signal from a guitar one octave higher in pitch, and mixes it with the original and added distortion fuzz.

What songs use the Hendrix chord?

The Hendrix chord has subsequently become quite ubiquitous throughout rock and pop music, right up until today. It can be heard down through the decades, for example, in songs by artists as diverse as Steely Dan (“Kid Charlemagne”, 1976), the Pixies (“Here Comes Your Man”, 1989) and Muse (“Hyper Music”, 2001).

What gauge strings did Hendrix use?

Jimi used Fender Rock ‘n’ Roll 150 strings (. 010, . 013, . 015, .

What gauge pick did Jimi Hendrix use?

This seems to be the pick that Jimi used most of the time. Looking through the photos, one can usually notice that he holds a red/black pick in his hand. This is probably Fender’s (more likely) or possibly Manny’s Music (probably used just on occasion), 351 shape celluloid pick.