What Distortion Settings Did Kurt Cobain Use?

Cobain’s distortion primarily came from a Boss DS-1 distortion, then later from a Boss DS-2 Turbo distortion.

What setting did Kurt Cobain use on distortion pedal?

Bottom Line Up Front. Kurt Cobain used a range of tones depending on the songs he was playing, but generally, he set his amp settings at 7-8 for the treble and mids and the bass around 5. He generally set his distortion high for choruses (8-10) unless a pedal was used.

What kind of distortion does Nirvana use?

Boss DS-1 Distortion
Kurt Cobain used a Randall solid-state head and 4×12 cab at the time, but for the album, Kurt used Endino’s Fender Twin Reverb, and the only pedal he used was a Boss DS-1 Distortion.

Did Nirvana use overdrive or distortion?

The DS-1 was considered the main factor in Kurt’s tone in this era. It was his main distortion tone. The DS-1 is a harsher style clipping than a standard amp overdrive or other overdrive style pedal. This cutting tone became a signature part of Cobain’s wall of sound.

What were Kurt Cobain amp settings?

And since Kurt used pedals to boost his sound, the amp should be on the clean channel with the gain and reverb turned down. Your settings should then look like this: Bass – 6. Mid – 8.
Kurt’s Amp Settings (Nirvana Tone)

• Bass – 4.
• Mid – 5.
• Treble – 6.

What tuning is blew in Nirvana?

Bleach and Blew EP
Not realizing that they had already tuned to their favored D Standard tuning, the band tuned further down to Drop C on the first day of the sessions and recorded several songs in that tuning.

What distortion did SRV use?

Tycobrahe Octavia
He only used them for a brief period. from 1989 until his death. Stevie initially used Roger Mayer Octavia pedals, but when Diaz located three New Old Stock Tycobrahe Octavia pedals, he switched to those.

What was Kurt Cobain’s tuning?

Kurt Cobain’s primary guitar was a Fender Jaguar, which he tuned to a drop D tuning. He also used a variety of other guitars, including a Fender Mustang and a Fender Stratocaster. He typically tuned his guitars to a standard E tuning, but would occasionally tune them to a drop D or a lower tuning.

What distortion did David Gilmour?

Fuzz Distortion. Fuzz distortion is an important component of David Gilmour’s tone. In the 60s, fuzz distortion was common as there weren’t many distortion or overdrive options available.

Did Oasis use distortion?

Supersonic is one of the Oasis’ that uses pretty high distortion. Here are some settings to give a try on your guitar and amp.

Did Kurt Cobain use distortion pedal?

During the Nirvana years, Cobain almost always used the Boss DS-1 distortion pedal.

Did Kurt Cobain use delay pedal?

Amp / Amp Settings
Kurt Cobain mainly used A Mesa Boogie Studio . 22 Preamp with a Crest 4801 Power Amp into a Marshall Cabinet. However, he used the clean channels without affecting the tone of the amp. Instead, he relied on his pedals for any kind of effects like distortion, delay, reverb, and chorus.

Is tube screamer overdrive or distortion?

The Tube Screamer is an overdrive pedal, and not a distortion pedal. It adds grit and crunch to your tone and is popular with classic rock, indie and blues guitarists. Distortion pedals on the other hand are more aggressive and suit heavier styles of music.

How do you get a Nirvana tone?

The Quick Answer. To get Nirvana’s tone with your amplifier, have the treble and mids fairly high (around 7-8) and the bass on around 5 to begin with. The distortion should be quite high for the chorus (usually between 8-10), unless you’re using a pedal.

How do I get grunge tone?

How to Get a Grunge Sound

1. ‘Stack’ sources of distortion to create a heavily saturated tone.
2. Add a fuzz pedal (optional)
3. Tune down the guitar.
4. Play power chord structures and other grunge elements.
5. Play simple melodies.
6. Play in a minor key.
7. Play clean arpeggiated picking patterns.
8. Create feedback with your amp.

Did Kurt Cobain use humbuckers?

WHAT DIMARZIO PICKUPS DID KURT COBAIN USE? Kurt Cobain’s 1965 Jaguar was purchased from the Recycler classifieds in 1991 and already had two double cream DiMarzio humbuckers installed when he bought it: a PAF® in the neck and a Super Distortion® in the bridge.

What tuning is most death metal?

Drop G tuning has been most commonly found in heavy genres of music, creating a dark, foreboding sound. While drop B tuning has been favored by heavy metal bands such as Slipknot, bands that fall into the categories of hardcore, grindcore, death metal, and doom metal are the provinces of drop G tuning.

Did Kurt Cobain use grunge pedal?

The pedal was used during Nirvana’s show at the San Diego Sports Arena in San Diego, California, on December 29, 1993, during which Cobain threw the pedal offstage and joked, “Excuse me, that was my grunge pedal”. You can view the incident at around 28:56 in the video below.

Did SRV use overdrive?

Vaughan also dabbled with a range of pedals, but his mainstay for overdrive was an Ibanez Tube Screamer.

Did SRV scoop his mids?

SRV’s tone is relatively scooped (low mids) and you need to EQ and match the amp, speakers, pedals and guitar all together. A bright sounding guitar (thin neck, hard fretwood material, bright pickups) should be matched with an amp that has enough mids and lows.

Does Jimi Hendrix use distortion?

A key component to achieving a Hendrix tone is fuzz distortion. Hendrix used a Fuzzface pedal to add more dirt and drive to his amp. Fuzz distortion is very different to typical distortion or overdrive pedals. If you don’t have a fuzz pedal you’ll find it very hard to achieve a decent Jimi Hendrix tone.