What Size Rear End Is In A 2016 Mustang Gt?

Every version and model of the Mustang from 2011 to the current 2022 Mustang received an 8.8 rear end.

What Mustangs have the 7.5 rear end?

All ’79-85 Mustangs featured the 7.5 rear ends.

What differential does the Mustang GT have?

Mustang GT 2015-2022 Super 8.8 Torsen Differential.

What rear end is in a 2015 Mustang GT?

2015 Mustang came offered with the following rear gear ratios from the factory: 3.31 – Mostly in automatic V6 Mustangs. 3.55 – Common for manual Mustangs. 3.73 – Standard for Performance Package Mustangs and the Shelby GT350/GT350R.

What gear ratio does a 2016 Mustang GT have?

2016 Mustang: Performance/Handling

How do you tell if you have a 7.5 or 8.5 rear end?

The 8.5 rearend will have a round cover, and part of the cover will extend rearward to make room for the ring gear. You will also notice the large, flat, cast-in protrusions at the five and seven o’clock positions. These protrusions are larger than those on the 7.5 rearend.

What Ford came with a 8.8 rear end?

8.8 IRS (Independent Rear Suspension)
The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.

Does a 2016 Mustang GT have a limited-slip differential?

Driving Impressions
Finally with an independent rear suspension to replace the venerable live axle, a strong limited-slip differential, and standard 18-inch wheels, the Mustang is nimble, forgiving and flat. Base engine is a 3.7-liter V6 that makes 300 horsepower.

What rear end is in my Mustang?

Every version and model of the Mustang from 2011 to the current 2022 Mustang received an 8.8 rear end.

Are 3.73 or 4.10 gears better?

3.73, for every 373 rotations of the driveshaft you get 100 rotations of the axle, and for 4.10, for every 410 rotations of the driveshaft you get 100 rotations of the axle. Now, this means that your engine is spinning faster on 4.10 rather than 3.73.

Is 3.55 or 3.73 gears better?

PERFORMANCE: The larger the axle ratio number, the quicker the truck will accelerate. For example, a truck equipped with 3.55:1 axle gearing will accelerate faster than one equipped with a 3.31 axle ratio. Similarly, a pickup with a 3.73 axle ratio will be faster than one with 3.55s.

Are all Ford 8.8 rear ends the same?

There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter). The 31-spline axles (1.29 inches in diameter) are more desirable but far less common.

What does a 3.73 gear ratio mean?

This number is shown in the ratio, which represents the number of the ring gear’s teeth divided by the number of the pinion’s teeth. If a truck has an axle ratio of 3:73:1, for example, the driveshaft turns 3.73 times for each full wheel spin.

What does 1 2 3 mean on a Mustang?

N – Neutral. D – Drive. 3 – Third gear 2 – Second gear 1 – First gear. O – Overdrive (if equipped)

What is a 5.0 1 gear ratio good for?

Slow. A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure. My favorite cranking reel is the new Lew’s BB1.

What does an 8 3 4 rear end mean?

Available as original equipment in many Chrysler cars over all platforms, the Mopar 8 3/4; is a strong rear axle assembly that is highly adaptable as a donor component. Originally introduced by Chrysler in 1957, the 8 3/4; rear was used in Chrysler car and Dodge truck and van chassis until 1974.

Is a Ford 8.8 rear end strong?

This rearend is lighter than a 9-inch and is as strong as a 12-bolt (except for the axles), and many Mustangs came from the factory with Traction-Lok limited-slip differentials.

How do I know if I have an 8.8 or 9.75 rear end?

Also you can tell by the diff cover shape. There’s pictures online. Basically if it’s symmetrical then it’s the 8.8. If it’s tapered on one side it’s the 9.75.

What Fords have a 9-inch rear end?

Common applications

• 1957-1986 Ford F-100 & F-150.
• 1958-1960 Edsel (All series including Wagons)
• 1976-1980 Ford Granada.
• 1976-1979 Lincoln Versallies.
• 1957-1970 Ford Fairlane.
• 1957-1971 Ford Thunderbird.
• 1964 1/2-1973 Ford Mustang.
• 1966-1983 Ford Bronco.

Whats better open diff or limited slip?

If the other wheel spins in the opposite direction, you have an open differential. If it spins in the same direction, you have a limited slip differential, or LSD. When working properly, an open differential is the best riding, most comfortable option for everyday driving.

What does GT edition mean?

What Does “GT” Stand For? GT stands for grand tourer or gran tourer, a type of car that’s designed with both long-distance driving and high speeds in mind. These vehicles typically combine luxury and performance attributes, more often than not featuring a 2+2 seating configuration.