What Is The Best Sand For A Horse Round Pen?

Silica sand is commonly used for horse arenas due to the hardness of the sand particle. It is a natural sand that resists weather and breakdown due to the hardness so lasts longer as an arena or track footing.

What type of sand is best for a round pen?

We sell washed concrete sand which is suitable for roundpens and horse arenas. It is a medium size course sand particle that holds up to most uses very well. You do not want over 3 inches of sand in the arena or roundpen and you may want to start with a 2 inch lift. Too much sand can injure your horse.

What is the best ground for a round pen?

For the position of a round-pen, we recommend a particularly permeable, stony ground. In a first step, the uppermost soil layer is removed and a gradient of 1 – 1.5 % established. For particularly loose surfaces, we recommend a construction fleece in addition to support the function of the separating layer.

Do you need sand in a round pen?

A good round pen base will have 4-6 inches of crushed stone that has been compacted down and leveled. This will allow for proper drainage. The footing is placed on top of the compacted base. For a sand – rubber mixture, you will want to put down 1 inch of rubber chips and 1.5 inches of sand.

What is the best footing for a round pen?

Likely the best footing option for round pens, using a combination of material provides you with many benefits. A common combination includes a base layer of gravel, followed by wood shavings. Finally, add a nice layer of sand on top for ultimate cushioning.

What kind of sand is used in horse arenas?

Riding arena surfaces should contain cleaned and screened, medium to coarse, hard, sharp sand. Fine sand will break down more readily into small enough particles to be lofted as dust. “Cleaned” means the material has been washed of silt and clay, making the sand less compactable and less dusty.

How many tons of sand do you need for a horse arena?

50 to 300 tons
A standard size horse arena will need anywhere from 50 to 300 tons of sand. The biggest determining factor is the dimensions, or size, of the arena and the depth of the footing. Many styles of riding only need 2 to 4 inches of footing for their arena while some need more than 8 inches of depth.

What is the best size for a horse round pen?

The most common recommendation for the average equestrian is to have a round pen that is between 50 – 60 feet in diameter. The diameter is the straight line through the center of the circle, or more simply stated the circle’s width.

How do you keep sand in a round pen?

We have attached rubber belting to the inside of our roundpen which is up about 28″ or so and eliminates them sticking their feet through it and keeps my sand inside. Unlike plywood, it will last forever. Usually you can pick up some cheap at a nearby gravel pit as they dispose of it when it gets worn.

How many 12 foot panels do I need for a 50 foot round pen?

13 panels
Q: How many 12 foot panels do you need for a 50 ft round pen? You will need 13 panels.

How do you prepare the ground for a round pen?

To use wood shavings or mulch: Start by adding a layer of gravel. Then, spread a layer of wood shavings or mulch on the gravel. These materials make good footing because they create a cushion over the ground. But if they go too wet, they can become slick.

What can I mix with Arena sand?

Combining Arena Sand with Other Materials
Sand is a great choice for horse arenas because it can be combined with topsoil, wood chips, rubber, and other materials to create the ideal surface. For example, topsoil or wood can be combined with our sand to improve moisture retention.

How many 10 foot panels do I need for a round pen?

How many 10′ panels in a 50′ round pen? 16. That’s how many round pen panels you need for a round pen of 50′ diameter.

Is concrete sand good for horse arenas?

In some cases, a well balanced concrete sand can work but typically, mason sand is easier to stabilize. The sand is the most important ingredient in your footing layer and makes a huge difference in how the surface will interact with the horse, to either support injury prevention or promote lameness.

How tall should a round pen be?

Most modern round pens, however, are intended for domesticated horses who do not fear humans. These designs commonly are built about 6 feet (1.8 m) high, which still discourages jumping out, but use fewer materials and are less expensive.

How many cattle panels do you need for a round pen?

12
Typical round pens are packaged together with 12′ panels, which is the most popular size.

What is the best sand for an outdoor arena?

Quartz and Silica are commonly used for horse arenas because the particle hardness.

What is the best base for a horse arena?

We highly recommend using a blinded stone system to separate your riding arena surface from the drainage stone. This system uses a 4/20mm hardstone for the drainage, with a smaller stone, such as a 2/6mm, laid on top. The blinding layer is compacted to provide a level base for your chosen surface.

What is the best horse arena surface?

They need a base, and sand, ideally silica sand, is best. Finally, rubber is probably the most comfortable surface to fall off on to. Best for: outdoor arenas, particularly for jumping, since it is less likely to result in skidding when horses land or concussion injuries.

Is silica sand safe for horses?

Silica Sand Surfaces
As trusted sellers of equine sand, we recommend that sand should never be used as a stand-alone riding surface. Instead, combining it with other materials, such as Daytec® stabilising fibre, rubber chippings or both, ensures a stable footing.

How much does sand cost for an arena?

Sand. To get decent footing for your arena, you can expect to spend around $1 to $2 per square foot. Sand footing is probably the most common and diverse of these materials and most arenas are going to have some sand included in their footing composition.