Does Cobb Accessport Have Stage 2 Tune?

Delicious Tuning – Stage 2 Tuning & Cobb AccessPort Package for your vehicle adds increased torque across the board. While the OEM configuration might not be everything you hoped it might be, our Stage 2 Tune smooths out the entire power band.

What do you need for Cobb Stage 2?

Stage2. Exhaust Requirements: COBB Catted J-pipe with high flow catalytic converter 541204. COBB Titanium 515140 or Stainless 515132 cat-back exhaust.

Can you have multiple tunes on Cobb Accessport?

The access port can have multiple tune files which are slow to change between (you should use a battery charger, car has to be in accessory mode, etc.)

What is Stage 2 Focus ST?

Stage 2 Performance Software has been specifically developed to attain the best possible performance from the ST with a bolt on performance exhaust and Revo Air Intake System. Stage 2 allows you to run a sports cat without the Check Engine Light (CEL) being triggered by a ‘CAT Efficiency’ error code.

How much HP does a Cobb Stage 1 add?

Up to 10% more peak horsepower and torque. High-quality intake with reusable oiled filter. Handy tuning device with COBB OTS Maps. For USDM, 6-speed manual transmission only.

What does a Stage 2 tune require?

A stage 2 tune involves fitting a turbo-back exhaust on turbocharged vehicles or a cat-back exhaust system on non-turbocharged vehicles. In either case, these systems are designed to improve airflow from the engine. They are also well-known for improving the sound of a car.

What parts are needed for a Stage 2 tune?

The most common stage 2 tuning parts include

• Fast Road Cam.
• DPF and Cat Replacement with Higher Flow Rates.
• High Flow Fuel Injector & Fuel Pump Upgrades.
• Ported and polished head.
• Power/Sport Clutch.
• Lighter Flywheels.
• Nitrous Kits.
• Intercooler Upgrades.

How much HP does a Stage 3 Cobb tune add?

81 hp
COBB shows that Stage 1 adds about 20 hp and 60 lb-ft of torque with just the COBB AccessPort and a panel filter; Stage 2 adds 65 hp and about 75 lb-ft over stock with COBB’s new EcoStang intercooler system and recommended cat-back exhaust; and Stage 3 finds a whopping 81 hp and 80 lb-ft of torque with a required turbo

Are piggyback tunes Safe?

Piggyback tunes, like the JB4, typically build in additional safety features too. For example, if the JB4 detects dangerously lean AFR’s it will revert back to stock boost in milliseconds. Next, they are incredibly easy and safe to install. Piggyback tunes are generally considered “plug and play” tuning solutions.

Does Cobb AccessPort add HP?

Cobb accessport will give approx 25+ hp and 14+ torque. The cold air intake from cobb will not give any more hp gains but will give the intake some noises and make the car seem faster or stronger. The stock intake is roughly good for about 400 hp.

Does APR offer Stage 2?

APR Stage 2
To get more power, the vehicle can be outfitted with an upgraded intercooler, and various other bolt-on modifications all without requiring any new modifications to the ECU. APR Stage 2 is available for 91 AKI, 93 AKI, and 104 AKI in North America, and 95 RON, 98 RON, and 108 AKI in the Rest of the World.

What Is a Stage 2 engine build?

Stage 2: this is typically referred to an engine with a performance cam upgrade as well as the other components within a Stage 1 combination. A typical Stage 2 has generally +20-25% more HP than stock.

What are Stage 2 upgrades?

Stage 2 Modifications
Like stage 1, stage 2 mods are usually a DIY fit but will require more specialist knowledge and tools. Some examples of stage 2 mods include aggressive remap that requires a stronger turbo, sports exhaust requiring new headers and internal mods requiring fuel to be uprated.

What is Cobb stage2?

The COBB Stage 2 Power Package is a simple bolt-on and tuning solution for your 2011-2014 WRX Sedan!

What Is a Stage 2 car mod?

Typical stage 2 mods include an aggressive remap that requires a larger turbo, or higher spec turbo control valves, camshafts, and head work that alter the air flow into the engine and replacement of catalysts and filters with better flowing alternatives (if legal in your area or region).

How much bhp does a Stage 2 add?

Stage 2 tuning doesn’t typically have the same level of gains – you can realistically expect a further 5-10% increase in power and torque.

How much HP does a Stage 2 tune add?

Revo quote gains from 55HP up to 90HP depending on what settings are used with their software. The required hardware for their stage 2 software includes a full turbo-back exhaust with a sports-cat and a high-flow air intake.

How Much Is a Stage 2 tune?

You can expect to spend around $200 to $500 on stage 1 modifications and $450 to $850 on stage 2 tunes. In addition to stage 1 mods, stage 2 includes induction kit mods to increase airflow. Moreover, a turbo-back can be added to improve airflow from the engine.

What does Cobb Stage 2 tune do?

Delicious Tuning – Stage 2 Tuning & Cobb AccessPort Package for your vehicle adds increased torque across the board. While the OEM configuration might not be everything you hoped it might be, our Stage 2 Tune smooths out the entire power band.

Do you need to stage 1 remap to get Stage 2?

While many car owners start with a stage 1 remap before progressing to stage 2, this isn’t necessary, and you can theoretically take your car for whichever stage of ECU remapping you want – when trying to find the best remap company in your area, try asking garages if they can do a stage 2 or 3 remap on a stock car.

Is a Stage 2 remap worth it?

Most start at Stage 1 & quickly progress to stage 2. We recommend you go straight in at stage 2! Keeping the car within manufacturer tolerances but optimizing it for driver preferences and extracting the very best from a stock OEM setup in good condition.