Why Is My Mustang Heater Not Working?

The most common reasons a Ford Mustang heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.

Why is my car blowing out cold air when the heat is on?

Low Coolant Level
The coolant (usually a mixture of water and antifreeze) in your engine doesn’t just work to keep the engine from overheating: It’s also the source of heat supporting the heating system. If there isn’t enough coolant in your system, the heater core will blow cold air into your car.

Why did my car heater suddenly stop working?

The first thing to do if you’re having issues with your car heater is to check your engine coolant. Make sure to do this when your engine has cooled down to avoid being burned. If your coolant level is too low, there won’t be enough hot liquid in the heater core, resulting in cold air.

Why is my car heater not blowing heat?

Here are the most common reasons why your car heater isn’t blowing hot air. Low coolant: Whether caused by a leak or water evaporation, low coolant is the most common source of poor heater output. Thermostat: A stuck-open thermostat prevents the engine (and coolant) from heating up.

How much does it cost to replace a Mustang heater core?

The average cost for a Ford Mustang heater core replacement is between $873 and $1,026. Labor costs are estimated between $447 and $564 while parts are priced between $426 and $462. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can a blown fuse cause heater not to work?

Faulty Wiring or Blown Fuses
Similar to your broken HVAC controls, your car’s wiring could be broken or have a short in it. This would mean the heater isn’t triggered when the driver commands it to function. Not good.

How do you fix a car with no heat?

Ways to Fix Your Heat Issues at Home

1. Let your vehicle’s engine cool for 15 to 20 minutes, remove the radiator cap, and use a funnel to safely pour coolant.
2. Fill your new coolant until the reservoir is full.
3. After you’ve properly filled the coolant, replace the radiator cap and start the car to see it the heat comes on.

What to check if heat is not working?

Heater Not Working? 7 Troubleshooting Tips:

1. Check that your thermostat is set to “heat.”
2. Change the filter.
3. Make sure the gas is on.
4. Clear the chimney exhaust flue.
5. Clean away leaves and debris from exhaust vents.
6. Flush out the drain lines.
7. Check for blocked ducts restricting airflow.

Why is my heater running but no heat?

Most furnaces will default to just running the blower if it senses a malfunction. Furnaces have an array of sensors that will detect overheating and automatically shut off the heating element if it senses a possible safety problem. This is why you will experience your furnace “running” but not heating.

Why did my heater stop blowing hot air?

It’s most likely an incorrect thermostat setting if you find your furnace blowing warm air, not hot. The fan is set to “on” instead of “auto.” Furnaces only pump hot air until the thermostat setting is reached, so if your fan is always on, it will blow both hot air when the furnace is heating and cold when it’s not.

How much does it cost to fix a car heater that blows cold air?

The total cost of parts and labor will range between $800 and $1,000 to have your heater core fixed by a professional. Labor costs vary, so call ahead and get a quote from multiple repair shops. If you fix the heater yourself, you’ll only have to pay for the cost of a new heater core which runs between $100 and $300.

What are signs of heater core going out?

Five Signs Your Car’s Heater Core Is Going Bad

• Fog Inside Your Car. Two things could be going on if you have fog inside your car.
• Sweet Smells in the Car. The sweet smell in your car might not be your perfume or the donuts you’re taking to work.
• Constant Engine Coolant Loss.
• Cold Air in the Cabin.
• Cold Cabin/Hot Engine.

How do you know if heater core is broken?

Heater core failure symptoms

1. Weak or no airflow.
2. Cold air (not warm) coming through the vents when the heater is on.
3. Coolant leakage visible inside the cabin or a damp smell.

Can you drive with a blown heater core?

You can still drive on with the condition; however, you should not, for a long time. The heater core uses the engine’s coolant, and a faulty heater core affects the cooling effect which then raises the temperature. Not curing the issue and continue to drive the vehicle this way can lead to further engine damage.

How can you tell if a blower fuse is blown?

If the blower motor isn’t running you should:

1. Use voltmeter or ohmmeter to check for a blown fuse. If you find one, replace it.
2. Start car and see if blower motor works.
3. If the circuits are in good repair but the blower motor keeps blowing fuses, replace the blower motor [source: You Fix Cars].

What fuse controls the heat in a car?

Locate the blower motor fuse, likely a 30 or 40 amp, it may be marked on the fuse box cover or in the driver’s manual. What is this? Use a test light or voltmeter to check for power at the blower motor fuse with ignition and blower motor on.

What causes no heat?

Often, no heat in the home is a result of thermostat issues, whether they be true malfunctions or errors in settings. Whenever you notice no heat, check your thermostat first for troubleshooting. Make sure your thermostat is on – the display should be on as normal. If it’s not, there could be a power issue.

How do you restart a heater?

How to Reboot a Furnace

1. Change the Filter. Before you do anything, check the furnace filter.
2. Check the Pilot Light. If the pilot light is off, your furnace can’t get the spark necessary to light the boilers.
3. Turn the Furnace Off and Back On Again.
4. Call a Certified HVAC Professional.

How do you fix a heater that blows out cold air?

Check Furnace Air Filter
A dirty air filter hinders air movement through the furnace. This raises temperatures inside the furnace, and the limit switch shuts heating cycles down if the unit becomes too hot. If you have a dirty filter, replacing the filter typically stops cold air from blowing.

Why is it still cold with heater on?

The reasons your house is cold even with the heat on could be because of poor insulation, your furnace not working properly, rooms with high ceilings, or your heating system doesn’t cover the whole house. Each of these issues can prevent your home from properly heating.

Can low coolant cause no heater?

Check the Coolant and Water Pump
First, check your coolant level to be sure there is enough liquid in there to even get to your heater core. If your radiator is very low on coolant, you’ll get no heat. If your levels are okay, you either have a bad water pump or a thermostat that isn’t opening.