What Does It Mean When A Cobb Accessport Is Unmarried?

Married Cobbs are sold by people who forget to unmarry them before selling, or total the car or don’t want to lose the map on the car when selling it, or selling the AP. When you unmarry an AP it reverts the car to the map that was on the car when you installed the AP.

Can a Cobb Accessport be unmarried?

If an Accessport was never uninstalled from a previous vehicle, it can be re-licensed, or set to an uninstalled state (aka unmarried). The Accessport is essentially 2 parts: the hardware to flash the vehicle and the tuning license that is installed on the car.

Can you Unmarry an Accessport yourself?

If you are going to remove your Access Port, and return your ECU to stock, you do not have to take your car to a tuner. You can accomplish this yourself with the Access Port. To return your ECU to stock, you are going to have to re-write your base map, so you will need to put your car into test mode.

Can you use a Cobb Accessport on a different car?

Installed State
If “Install” is an option, this Accessport is ready to work on another compatible vehicle. If “Uninstall” is an option, this Accessport will not work on your vehicle until it is uninstalled from the previous vehicle or sent to COBB to be re-licensed.

How do I reset my Accessport?

How To Reset Min/Max Values

1. Link your Accessport to your vehicle and turn it on.
2. Select “Gauges” from the main menu.
3. Go up and select “Setup”
4. Scroll up or down until the gauge you want to change is selected.
5. Select “Reset All” (resets all gauges) or Reset Current (only resets the currently selected gauge)

What does OTS mean Cobb?

Off The Shelf
The COBB Tuning Accessport comes with Off The Shelf (OTS) maps designed to support any vehicle of a specific make and model throughout all climates and elevations.

Does Cobb Accessport add HP?

Cobb accessport will give approx 25+ hp and 14+ torque. The cold air intake from cobb will not give any more hp gains but will give the intake some noises and make the car seem faster or stronger. The stock intake is roughly good for about 400 hp.

What happens if I lose my Cobb Accessport?

Most likely you will have to reflash your ECU back to Stock map from Cobb or Dealership and then purchase a new AP and reflash it. you should be able to buy a new cobb ap and install the tune from that new hand unit. it will over write anything on the ecu.

Can I leave my Cobb Accessport plugged in?

The Accessport does not need to be plugged into the vehicle for the calibration to be in effect. You can disconnect the Accessport at this time or leave it plugged in to use any of the many features outlined below. Please note that the Accessport is designed to work with only one vehicle at a time.

Does a dyno tune increase HP?

It increases the horse power of your vehicle and returns the vehicle to stock fuel economy. It also prevents or minimizes backfire. Dyno tuning can also save you from costly repairs in the future. A dyno tuned engine does not have to work as hard as a vehicle that has not been dyno tuned.

What is a Stage 1 tune?

A stage 1 tune is simply an ECU remap or chip tune. This is the most cost-effective way to modify any vehicle for performance. Turbo-diesel and turbo-petrol vehicles respond extremely well to stage 1 tuning and commonly see a 20 – 40% increase in bhp and torque.

Can Cobb Accessport change tire size?

Tire Size Adjustment
You can now adjust the tire size directly on the Accessport. This allows the correct read out for speedometer calculations. Note that if you have a different way of accomplishing this prior to this update, it should be re-adjusted with the Accessport (to avoid DTCs).

What does resetting the ECU Do Cobb Accessport?

Reset ECU – Clears trouble codes as well as any learned values in the ecu (ignition or fuel learning) for example DAM in Subaru or OAR/KOM in Ford vehicles. Reset Codes – Clears check engine lights/trouble codes but leaves any learned values intact.

Can you reset a tuned ECU?

Yeah, dealer with a tech 2 can flash it back to stock. It doesn’t have to be perfect, it just needs to be done in two weeks… you can just flash in a stock file that fits your trans (and gears if auto)…

Can you flash back to stock with Cobb?

On the Cobb website it says you can just flash one of their maps when you want to go back to stock.

Does Cobb have a burble tune?

This is an option to get a burble tune created for any Cobb Off The Shelf (OTS) map. We will create a new separate tune with this featured added that you can flash and use. The burble effect is simply some pops or exhaust crackle between shifts or when coasting in gear above 3200 rpms.

What does DAM mean on Cobb?

Dynamic Advance Multiplier
Generally, Dynamic Advance Multiplier (DAM), Feedback Knock Correction, and Fine Knock Learning are relevant when monitoring knock. DAM represents a global adjustment to ignition timing.

What does Hwg and LWG mean Cobb?

HWG: Higher wastegate duty cycles (HWG) for use when normal wastegate calibration produces lower than targeted boost (i.e. under boost). LWG: Lower wastegate duty cycles (LWG) for use when normal wastegate calibration produces higher than targeted boost (i.e. over boost).

How much hp does a Stage 3 add?

The Stage 3 kit improves torque by up to 24% over original equipment and gives you up to 39% more horsepower.

How much hp does a Stage 1 Cobb tune add?

Up to 10% more peak horsepower and torque.

How much hp can you gain from tuning?

For a general stock car (i.e. no additional performance parts), a tune will boost your hp by 10 to 15 percent. What’s more is that if you’ve added performance parts to your vehicle such as cold air intake, exhaust, or turbo, the hp boost you gain from tuning may be as high as 50 percent more!