Where Is The Serial Number On A Cobb Accessport?

* Serial number can be found behind the faceplate or by scrolling up on the main menu to Help -> About Accessport.

Where do I find my access port serial number?

Accessport V3

1. Scroll up to the question mark at the top that says “Help”
2. Select “About Accessport”
3. Click the down button until you reach the “Serial Number Sticker.” In some cases where the part number was changed or the Accessport was upgraded to add things like transmission tuning support etc.

Can you Unmarry an Accessport yourself?

If you are going to remove your Access Port, and return your ECU to stock, you do not have to take your car to a tuner. You can accomplish this yourself with the Access Port. To return your ECU to stock, you are going to have to re-write your base map, so you will need to put your car into test mode.

Can you reflash a Cobb Accessport?

Also, it’s important to understand that anytime an Accessport is installed or uninstalled from a car, that is always a Reflash by default. In those situations, a Realtime change is not even an option. On the flip side, there is never a time where you can’t perform a Reflash.

Does the Cobb Accessport have to be plugged in all the time?

The Accessport does not need to be plugged into the vehicle for the calibration to be in effect. You can disconnect the Accessport at this time or leave it plugged in to use any of the many features outlined below. Please note that the Accessport is designed to work with only one vehicle at a time.

Can you reuse a Cobb Accessport?

If an Accessport was never uninstalled from a previous vehicle, it can be re-licensed, or set to an uninstalled state. The Accessport is essentially 2 parts: the hardware to flash the vehicle and the tuning license that is installed on the car.

Will an STi Accessport work on a WRX?

Accessport. SUB-004 Accessports using firmware version 1.7. 4.2-18478 and newer are compatible with the 2021 WRX STi. If you already have an Accessport, simply connect it to your computer and Accessport Manager to update the firmware.

How do I reset my access port?

How To Reset Min/Max Values

1. Link your Accessport to your vehicle and turn it on.
2. Select “Gauges” from the main menu.
3. Go up and select “Setup”
4. Scroll up or down until the gauge you want to change is selected.
5. Select “Reset All” (resets all gauges) or Reset Current (only resets the currently selected gauge)

Can a Cobb Accessport be unmarried?

If an Accessport was never uninstalled from a previous vehicle, it can be re-licensed, or set to an uninstalled state (aka unmarried). The Accessport is essentially 2 parts: the hardware to flash the vehicle and the tuning license that is installed on the car.

How much is it to Unmarry a Cobb?

Cobb can unmarry an AP for $325, so add that to what people charge for used married APs and there isn’t usually much value there. Married Cobbs are sold by people who forget to unmarry them before selling, or total the car or don’t want to lose the map on the car when selling it, or selling the AP.

Can Cobb Accessport change tire size?

Tire Size Adjustment
You can now adjust the tire size directly on the Accessport. This allows the correct read out for speedometer calculations. Note that if you have a different way of accomplishing this prior to this update, it should be re-adjusted with the Accessport (to avoid DTCs).

How do I reset my Cobb tuner?

Steps to Use:
Go to the Troubleshooting menu on the main screen of your Accessport. Select scroll down and select “Reset Oil LIfe” Once you select it you should receive a warning message.

Does an Accessport void your warranty?

While using the Cobb AccessPort shouldn’t void your warranty, the manufacturer could deny certain claims. Plugging in a Cobb Accessport is unlikely to cause any damage, but any major modifications made to the ECU could damage the system.

What does reset ECU Do Cobb Accessport?

Reset ECU – Clears trouble codes as well as any learned values in the ecu (ignition or fuel learning) for example DAM in Subaru or OAR/KOM in Ford vehicles. Reset Codes – Clears check engine lights/trouble codes but leaves any learned values intact.

What does it mean to reflash a tune?

Flash tuning is reprogramming the electronic control unit or ECU chip to change how the engine works. You can find the chip within the injection system. It controls the amount of fuel and air mixture taking place in the engine.

Does Cobb have a E85 tune?

The simple answer is yes. We can tune E85 like we did before flex fuel was a thing.

How much HP does a Stage 1 WRX have?

15-21 HPF
WRX 15-21 HPF STAGE 1 | 215kW.

Does Cobb Accessport add HP?

Cobb accessport will give approx 25+ hp and 14+ torque. The cold air intake from cobb will not give any more hp gains but will give the intake some noises and make the car seem faster or stronger. The stock intake is roughly good for about 400 hp.

How many Datalogs can Accessport hold?

ten
Up to ten (10) datalogs can be stored on the Accessport at any time. The lowest number is the oldest log and the highest number is the newest.

Does Cobb Accessport update automatically?

Automatic/Required Software Update
To ensure an even playing field and that all Accesstuner and Accesstuner Pro users are utilizing our Green Speed compliant software, we have developed an automatic/required update function in the software.

Can a WRX be faster than a STI?

8/10 0-60 & Top Speed
Out of the box, the WRX hits 0-60 in 5.4 seconds and reaches a top speed of 145 mph, while the STI hits 0-60 in 4.8 seconds with an electrically limited top speed of 155 mph.