What Year Mustangs Have 8.8 Rear End?
8.8 Solid Axle It was also used in V8 equipped Mustangs from 1986 to the 2014 model years; and all Mustang models from 2011-2014.
Are Ford 8.8 rear ends strong?
This rearend is lighter than a 9-inch and is as strong as a 12-bolt (except for the axles), and many Mustangs came from the factory with Traction-Lok limited-slip differentials.
How do I know if I have an 8.8 rear end?
You can identify the Ford 8.8-inch rear by its rear cover. It has a thin metal or plastic 10-bolt cover, and the bolts are 7/16-inch thread. The cover is not quite square, measuring about 101/2 inches high by 11 inches long. The 8.8-inch pinion shaft is 15/8 inches and has 30 splines.
What has a 8.8 rear end?
First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from ’86 on, and in V6 Rangers and Explorers. There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter).
Is the Ford 8.8 a good axle?
Although not serving up the same beef as the respected
What is the best Ford rear end?
The
What size rear end does a 1966 Mustang have?
65-66 Mustangs come with the 7.25″ rear end, non-removable carrier.
What years did Ford use the 8.8 rear end?
8.8 IRS (Independent Rear Suspension)
The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.
Do V6 Mustangs have 8.8 rear end?
Then, from 1986-2010, the Ford Mustang 8.8 rear end went into all V8 Mustangs, and the Ford 7.5” rear end now went into all 4-cylinder (2.3L) up to 1993 and V6 Mustangs (3.8L). Every version and model of the Mustang from 2011 to the current 2022 Mustang received an 8.8 rear end.
When did Mustang switch to IRS?
Which Mustangs Use IRS? Mustangs that are 2015 model year and newer use independent rear suspension. The aforementioned 1999-2004 Cobra Mustangs use IRS as well. While some enthusiasts decry the move away from a solid rear axle, it represented an important shift for the Mustang moving into the modern era.
How do I know if I have an 8.8 or 9.75 rear end?
Also you can tell by the diff cover shape. There’s pictures online. Basically if it’s symmetrical then it’s the 8.8. If it’s tapered on one side it’s the 9.75.
What rear end does a 95 Mustang GT have?
Rear Axles
The ’94-’98 Mustang GT and Cobra had the 8.8-inch ring gear solid axle, while the ’99-2004 Mustang GT and Mach 1 had a wider track version of the same solid axle. Of course, the ’99-2004 Cobras had an independent rear suspension that was still based on the 8.8-inch ring-gear size.
What gear ratios did the Ford 8.8 come in?
Ford 8.8 Inch 3.55-5.13 Ratio.
Is a Ford 9-inch stronger than a 12 bolt?
A Ford’s 9-inch ring gear is larger than the 12-bolt’s 8.875-inch ring gear. The Ford’s larger ring gear plus its greater offset relative to the pinion results in a tooth contact area that’s slightly deeper than a 12-bolt’s, making the Ford marginally stronger.
What rear end ratio is best for racing?
If we have a daily driver, 2.55 to 3.25 gear ratios typically work best, whereas a street/strip application we would usually use a 3.42 to a 3.90 gear ratio, and race applications most commonly use a 4.10 and above gear ratios.
What rear end is good for racing?
Ford 9″– The Ford 9″ is definitely the most popular of the rear ends in drag racing. It offers good strength characteristics and the largest variety of gear choices. The thirdmember type center section allows a racer to have multiple gear ratios available and is much easier to change than a rear loading type rear end.
What rear end will fit a 65 Mustang?
A narrower ’65/’66 Mustang 8 or 9-inch rear end, or an 8 or 9-inch Granada/Monarch rear end can be installed in a ’67-’70 Mustang, you will just have to size the backspacing of the wheels, accordingly, for the narrower rear end width.
What size rear end does a 1965 Mustang have?
Currie® Ford 9-inch rearends for 1964 thru 1966 Mustangs and Cougars, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic muscle car or restomod build.
What Fords had a 9-inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
What was Fords last big block?
The
What was Fords biggest big block?
Ford 385 engine
| Ford 385 V8 | |
|---|---|
| Production | 1968–1998 |
| Layout | |
| Configuration | Naturally aspirated Big-block V8 |
| Displacement | 370 cu in (6.1 L) 429 cu in (7.0 L) 460 cu in (7.5 L) |
Contents