Where Is The Engine Code On A 1966 Mustang?
Where to find the engine block numbers: look toward the back of the engine block on the right hand side, above the starter. You will find the casting number at this location.
Where is the engine code on a 289?
Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.
What engine is in a 1966 Ford Mustang?
1964½–1966
| Mustang 1964½–1966 | |
|---|---|
| Engine | 170 cu in (2.8 L) Thriftpower I6 200 cu in (3.3 L) Thriftpower I6 260 cu in (4.3 L) small block V8 289 cu in (4.7 L) small block V8 289 cu in (4.7 L) small block HiPo V8 |
| Transmission | 3-speed manual 4-speed manual 3-speed automatic |
| Dimensions | |
| Wheelbase | 108 in (2,743 mm) |
What does C code mean on a 1966 Mustang?
C code – The C engine was the base V-8 Windsor, 200-hp engine for 1965 to 1968. It was the V-8 engine but without the expensive, high-performance upgrades. D code – The rare 210-horsepower 1964-and-a-half Mustang engines offered the four-barrel V-8 but lacked high-performance internals.
Where is the engine code on a 1965 Mustang?
Where to find the engine block numbers: look toward the back of the engine block on the right hand side, above the starter. You will find the casting number at this location.
What is a code 289?
Area code 289 serves the area surrounding Toronto, Ontario, Canada including Hamilton. It is an overlay for area code 905 and serves the same area.
How do you tell the difference between a 302 and 289?
A 289 and 302 block are identical for the 1968 year. The crank has a slightly longer stroke on the 302. 3″ on the 302, 2.87 on the 289. The piston has a slightly different pin height between the two engines.
What does J code mean Mustang?
For many enthusiasts and collectors, the ‘holy grail’ of first-generation Mustang models are the fabled ‘J-Code’ cars, produced for one year only between 1968 and 1969. These cars represent the changeover period between the ‘small block’ 289ci V8 to the 302ci ‘big block’ engine.
What does D code mean on Mustang?
The D Code and first F Code engines were Ford small-blocks used only in that short 1964.5 production period. The D Code was the first 289 cubic inch V8 to be in a Mustang, even before the popular A and C Code engines. The early F Code was a small V8 engine at just 260 cubic inches.
What does K code Mustang mean?
The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.
Which digit in a Ford VIN is the engine code?
8 9
Ford Motor Company uses the following VIN formats and codes.
American VIN formatEdit.
| Position | Sample | Description |
|---|---|---|
| 7 | J | Vehicle line, series and body code |
| 8 | 9 | Engine code |
| 9 | 9 | Check digit |
| 10 | 2 | Model Year |
How do I find my Ford engine code?
The tag is a series of numbers and letters etched in and used to decipher the year, make, and model of you engine. It is found underneath the bolts on the left or right side of the engine, near the front of the car. You can find the tag here on all six-cylinder engines made after 1964, and on some V8 engines.
What is the rarest 1966 Mustang color?
Emberglo. Another iconic color for the classic Mustang, Emberglo was a rare shade only offered in 1966. It wasn’t very common, but that only makes this unique orange even more special for Mustang owners.
How much is a 1966 Mustang with a 289 worth?
Vehicle Valuation Analysis
| Engines | Median Sale |
|---|---|
| 289 CID | 225 HP | $25,463 |
| 289 CID | 271 HP | $45,000 |
| 200 CID | 120 HP | $11,600 |
| 289 CID | 200 HP | $22,400 |
Are 1966 Mustangs rare?
Of the three body styles available that model year, fastbacks were rarest — only 35,698 rolled out of the assembly plants. But while there were 535,449 Mustangs that year with fixed roofs, there were only 72,119 with convertible tops. And guess what?
How much horsepower does a 1966 289 have?
The optional V-8s in 1966 were the 289ci 2bbl engine rated at 164 hp engines and then the 289ci 4bbl 210 hp engine. and the 289 HiPo engine rated at 271 horsepower.
Is AJ code Mustang rare?
The only real difference in the motor was the intake and heads, which were the same ones used on the ’66 289, but with updated castings. So while the J code may be rare, it’s hardly more than a 289 in an ironed shirt.
When did Ford put a 302 in the Mustang?
The 302 cubic inch engine was introduced in 1968 to the Mustang, one of seven variations of V-8s were available in the ’69–’73 models. It was designed with Federal emissions regulations in mind. Although it is a derivative of the 289 mustang, some parts are not interchangeable.
What was the first V8 used in a Mustang?
On March 9, 1964, the first Mustang, a Wimbledon White convertible with a 260-cubic inch V-8 engine, rolled off the assembly line in Dearborn, Michigan. A month later on April 17th, 1964, the Ford Mustang made its world debut at the World’s Fair in Flushing Meadows, New York.
What is a 1966 Mustang coupe worth?
We however are taking a look at the classic 1966 Ford Mustang of which examples are worth between $18,000 and $110,000. This however is split between the less desirable hardtops in the lower end of the spectrum while convertibles and limited-run special editions sitting on top demand a premium.
Can you switch from D to S while driving Mustang?
Yes, but doing so at high speed will be jarring to you and your transmission. At high enough speeds, if the car doesn’t stop you from doing it, shifting into L could cause you to blow the engine and damage the transmission as well. Best to do so at low speeds.
Contents