Can I Replace My Factory Amp With Aftermarket?

Published by Jennifer Webster on

If there are no digital connections between the radio and the amp, and the amp’s full-range analog input signals respond to the radio’s volume control, you can remove or bypass the factory amp and replace it with your own aftermarket amp.

How do I hook up an aftermarket amp to a factory amp?

The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

Can I bypass my factory amp?

Bypassing the factory amp takes a little more work because you have to run the bypass harness to the factory amp, which is often located in some other part of the car. It’s usually worth the extra effort because you’ll get better sound from your new stereo, even if you’re keeping those factory speakers.

Do I need an amp in my car if I replace factory speakers?

You Want the Best Out of Your Speakers
If you want the quality to improve, you need an amp for better sound. Sure, you can add new speakers to the factory system, but installing a new head unit combined with an amplifier is the best way to experience the quality you desire.

Can you wire a sub to a factory amp?

So now you know – it’s definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you’d like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.

Does adding an amp improve sound quality?

Adding an amplifier can provide cleaner sound, more power, and better performance, improving the experience of listening to music in your car. Benefits of adding an amplifier: Better Sound Quality – Adding an amplifier can improve your sound by being a power source to really drive your speakers without straining them.

Are aftermarket amps worth it?

Aftermarket amplifiers are usually necessary when people are installing giant subwoofers and/or want more volume. As long as you replace the speakers with others of the same size but better specs, you can get better quality sound.

What happens if amp is not powerful enough?

If you don’t have a powerful enough amplifier to reach the volume levels you want, you can damage the speakers by feeding them too much high-frequency energy by driving the amplifier into clipping. It’s the extra power in these harmonics that damages speakers.

Should I unplug my amp when not in use?

Amplifiers are usually made to last for quite a long time, so the chances of anything happening to them are close to none. Naturally, the best way to do everything is to unplug it after you’re done playing. But with a good quality surge protector, there is almost nothing that can happen if you leave everything on.

How do I know if my factory amp is blown?

These are listed below: There is a noticeable distortion in the sound. There is no sound even if you have already turned on your audio system. Your stereo system starts making bizarre sounds such as farting sounds.

Do aftermarket speakers drain battery?

Car audio systems draw power from the car battery and will drain the battery if the engine and alternator are off or if the alternator cannot charge at a rate faster than what the audio system requires. Aftermarket systems may draw too much power, and poor installation may cause parasitic draw.

What amp is best for tweeters?

  • #1 Rockford Fosgate P400X4 Punch – The Best Amp for Tweeters.
  • #2 MTX Audio THUNDER75. 4 – Best Value Amp for Tweeters.
  • #3 Alpine MRV-F300 – Best Affordable Amp for Tweeters.

Will aftermarket speakers be louder?

These speakers highlight the typical scenario that happens when someone upgrades to a speaker solution that offers smoother frequency response and more bandwidth. The audio system will sound better, but isn’t as efficient. When provided with the power they need, the better speakers can play louder.

Can any amplifier work with any sub?

To ensure your car stereo system has excellent bass, you need to find an amp that matches your sub. In other words, the amp’s capabilities need to match the subwoofer’s specifications to work properly together. For the best sound quality, make sure the RMS watts of the sub and amp match.

Is a subwoofer cable just an RCA cable?

Subwoofer cables are basically the longer and more powerful versions of RCA cables. They have thicker insulating material and more shielding to protect them from interference and noise, which can degrade your audio quality. They also use heavier-gauge wire to prevent power loss.

Does subwoofer need to be grounded?

The ground loop will make itself known by a hiss or hum heard in the audio reproduced by the stereo system. All 12-volt components need to be grounded at the same location. This is something to consider when performing a subwoofer installation.

Should amp be stronger than speakers?

No, It is always recommended to use approximately twice as much amplifier power as the speaker’s power rating. More watts may provide more bass, but only if the amplifier you’re currently using is insufficiently strong for the speakers you’re using.

Should I EQ before or after amp?

As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.

Why do expensive amplifiers sound better?

Higher-quality amplifiers are going to have a lower impedance, a wider frequency range and the lower the total harmonic distortion.

Which brand amp is the best?

Top 11 Best Guitar Amplifier Brands In The World 2022

  • Fender.
  • Orange.
  • Vox.
  • Victory.
  • Blackstar.
  • Mesa/Boogie.
  • Friedman.
  • Laney.

What happens if amp is too high?

Amplifiers can be too powerful for speakers. Speakers are limited by the electrical energy that they can convert into audio. As a general rule, if the amplifier produces more electrical energy than the speakers can handle, it may cause distortion or clipping, but damage is unlikely.

Contents

Categories: Mustang