How Do I Get My 2014 Mustang Out Of Theft Mode?

How Do I Turn Off My Ford Anti-Theft System

1. Insert the key into the driver’s side door lock.
2. Turn the key once, but not all the way to unlock the door.
3. Do this again, but turn the key in the opposite direction.
4. Remove the key from the door, get into your Ford, and start the engine.

How do you bypass Mustang anti-theft?

Turn the key once, but not enough to fully unlock the door. Keep your key in this position for 40-60 seconds. Turn your key the opposite way, holding it for another 40-60 seconds. Remove the key, get into your vehicle, and start its engine.

How do I get my car out of anti-theft mode?

There are some cars that will recognize the key from you simply turning it back and forth in the door’s cylinder. It is best to try both methods: holding the key in the door, as well as turning the key both ways to disable the anti-theft system.

What triggers Ford anti-theft system?

The system arms when you lock your vehicle. When armed, the alarm is triggered in any of the following ways: If someone opens a door, the liftgate or the hood without a valid key or remote control. If you switch your vehicle on without a correctly coded key.

What happens when your car goes into anti-theft mode?

It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won’t return to normal operation unless you fix the issue of anti theft device car wont start. How to disengage anti-theft system?

How long does it take for the anti-theft system to reset?

Leave the key there for 15 minutes; it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes.

Why does my Ford say theft?

It’s not uncommon for the truck to remain in “theft” mode as a protective measure until the system is entirely reset. You may also need to reset the system if you ever have new key fobs made for your truck. This might be the case if you recently lost your keys or locked them in your truck and had to have new ones made.

How do I disarm my Ford security system?

Disarm the alarm by any of the following actions: Unlock the doors or luggage compartment with the remote control or, keyless entry keypad. Switch the ignition on or start the vehicle. Use a key in the driver’s door to unlock the vehicle, then switch the ignition on within 12 seconds.

How do I stop my anti-theft light blinking?

In most cases, the security light means that the car no longer recognizes the key you’re using, so you may be able to bypass the problem by using a different key. If a second key doesn’t fix the issue and the light is still on, call a trusted mechanic to help you identify the issue and reprogram the anti-theft system.

How much does it cost to get your car out of theft mode?

The average cost to fix a car immobilizer is around $300, including parts and labor. That said, the actual figure will depend on your car, what needs fixing, and which shop you choose to handle the repairs.

Why is the theft light blinking?

It is vehicle’s anti theft system which is known as immobilizer system. That blinking red light indicates that your vehicle is locked and Immobilizer system is up for protection.

How do you disarm security system without code?

Locate the control panel of your main security system and turn it off. Locate the power source and disconnect the power. This is the quickest way to disarm a home alarm without the code.

What is Ford’s engine immobilizer?

The engine immobilizer is a theft protection system that prevents someone from starting the engine with an incorrectly coded key.

Is the anti-theft light supposed to stay on?

To answer your question without to many contingencies added to it the answer is no. A security light just shows that the vehicle doesn’t see a matched key code and the vehicle is not ready to start.

What triggers immobilizer?

When you put the key into the ignition or have the key fob inside the vehicle (for keyless fobs), the transponder chip inside the key fob sends a security code to the car’s immobilizer system. What is this? If this security code matches the code in the immobilizer system, the car will be allowed to start.

What is Ford passive anti-theft system?

The system prevents someone from starting the engine with an incorrectly coded key. Note: Metallic objects, electronic devices or a second coded key on the same key chain may result in vehicle starting problems, especially if they are too close to the key when starting your vehicle.

How does anti-theft engine immobilizer work?

An immobiliser or immobilizer is an electronic security device fitted to a motor vehicle that prevents the engine from being started unless the correct key (transponder or smart key) is present. This prevents the vehicle from being “hot wired” after entry has been achieved and thus reduces motor vehicle theft.