How Do I Reset My Ford Sync When The Screen Is Black?

Published by Jennifer Webster on

Your SYNC 3 system may exhibit a blank or black screen.


Perform a soft reset.

  1. Select Radio.
  2. Hold the Power button (center of the volume knob) + the Right-Seek button at the same time for approximately five seconds.
  3. The display will indicate when the module is resetting. You may then release the buttons.

How do I force my Ford Sync to reset?

How do I perform a Master Reset with SYNC®* Gen 1?

  1. Press the PHONE hard button.
  2. Press the Down Arrow until System Settings appears on the screen and press OK.
  3. Press the Down Arrow until Advanced appears on the screen and press OK.
  4. Press the Down Arrow until Master Reset appears on the screen and press OK.

Why is my car display screen black?

Restart Your Car’s Infotainment System
The reason you’re facing the black screen issue may not even be related to Android Auto on your phone. It could be that your car’s stereo system or head unit is malfunctioning, so you’re unable to use Android Auto. A quick fix for this issue is to restart your car’s head unit.

Why did my Ford Escape screen go black?

Internal component failure of the cluster will often prevent the display from powering up at all, leaving the Ford Escape screen black and may even cause illumination problems for the cluster, with backlighting not working as it should.

How do I manually reset sync?

To perform a Hard Reset: With the ignition OFF, disconnect the power to the SYNC module buy either disconnecting the vehicle battery or the large 54 pin connector at the back of the module. Reconnect the power after 30 seconds. Turn the ignition on and wait for the system to boot.

How do you hard reset a sync module?

Use a small object or fingernail to press the reset button for 5 seconds. You will see a flash of red and then after 15 seconds a blinking blue light and solid green light appear at the front of the Sync Module. The Sync Module is ready to be added through the Blink app.

How do I recover from black screen?

If your PC boots to a black screen, you should restart your PC several times. After doing this repeatedly, the Windows Startup Automatic Repair screen should launch automatically. Click Restart. If it doesn’t fix the black screen issue, go to Advanced options, then select System Restore.

How do I reset my black screen?

If you experience a black or blank screen on your Windows device, try the following:

  1. To wake the screen, use one of the following keyboard shortcuts: Windows logo key + P or Ctrl + Alt + Del.
  2. For a black screen, use the following keyboard shortcut: Windows logo key + Ctrl + Shift + B.

How do you fix a completely black screen?

Ways to solve the black screen of death

  1. Fix connection issues with the monitor.
  2. Refresh the screen via Windows key sequence.
  3. Roll back the display driver/adapter (via Safe Mode)
  4. Prompt a System Restore (Automatic Repair mode)
  5. Refresh the screen via Windows key sequence.
  6. Restart the Windows Explorer program.

How do I reset my Ford Sync touch screen?

To perform a System Reset, press and hold the Seek Up (>>) button while pressing and holding the Radio Power button. After approximately 5 seconds the screen will go black. Allow a 1-2 minutes for the system reset to complete. You may then resume using the SYNC system.

Why has my Ford Sync stopped working?

Try switching off your cell phone, resetting it or removing the battery, then trying again. Try deleting your device from SYNC and deleting SYNC from your device, then trying again. Always check the security and auto accept prompt settings relative to the SYNC Bluetooth connection on your cell phone.

Why is my dashboard screen not working?

The Instrument Panel Is Completely Dark
If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

What is a master reset on Ford Sync?

A Master Reset completely erases all information stored on your SYNC System, but NEVER, NEVER, NEVER from your paired phone. A Master Reset will remove phone book info, call history, text messages, paired devices, saved addresses and navigation history on your SYNC System ONLY.

Where is the reset button on the SYNC module?

The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.

How do I turn my sync back on?

To turn on sync, you must have a Google Account.

  1. On your Android device, open the Chrome app. . If you don’t yet have the Google Chrome app, download it from Google Play.
  2. On the right of the address bar, tap More Settings. Turn on sync.
  3. Choose the account that you want to use.
  4. Tap Yes, I’m in.

How do I get my Ford Sync to work?

How To Set Up Your Ford SYNC®

  1. Turn on your mobile phone.
  2. Start your engine and ensure your radio is on.
  3. Access the Settings app on your smart device and enable Bluetooth as visible.
  4. Press “Phone” on your Ford SYNC® settings, and then “Add” to pair.
  5. SYNC® will prompt you to “Search for SYNC on your device”.

How do I get my Sync Module back online?

Sync Module Offline

  1. Verify Wi-Fi connection is working: Reboot the router and wait for internet to return.
  2. Verify your Sync Module is displaying a solid green and solid blue light.
  3. If your Sync Module falls offline again, try moving it closer to your wireless router.

What causes black screen death?

The Black Screen of Death is usually caused by a software glitch (or Windows Update) but can often be repaired. Black screens that occur seemingly at random are usually the result of a more serious hardware problem. This will require component repair or replacement. Whatever the case, there is almost always a solution.

What does screen black mean?

A black screen or blank screen indicates a general problem with a computer monitor that results in no display, or no indication of power. There are several causes to this type of issue. See the links below for troubleshooting steps.

How do I reset my touchscreen on my car?

Clean your touchscreen. Reboot the touchscreen by turning it off and back on again. Recalibrate the screen from the settings menu. Perform a factory reset.

Will disconnecting battery reset Ford Sync?

Turn off the engine on the vehicle. Disconnect the vehicle’s battery and wait for about 30 seconds. Reconnect the battery after that period. Start the engine and wait for the system to reboot.

Contents

Categories: Mustang