How Do You Measure A Horse For A Back Protector?

Run the tape measurement from the base of the back of the neck down to 2-4 inches above the bottom of the base of the spine, whilst sitting in a saddle or chair. If the back protector you choose is too long for you, it will interfere with the saddle whilst you are riding.

What size back protector do I need?

Back Protector Size Chart

Are back protectors worth it?

Some people may wonder if a back protector is even worth it, but the truth is that it can be very important in preventing serious injury in the event of an accident. There are different types of back protectors available, including those designed for off-road riding and general use.

Should I use back protector?

A back protector is an important safety element for avoiding injuries. Also, they’re not usually very expensive and they adapt to motorcycle jackets or suits such that you can’t tell they’re there.

What level body protector do I need?

Most body protectors are designed to comply with EN13158 and a recognised BETA level standard. This standard encompasses three levels; we would always recommend riders to choose level three protectors as these offer the best protection and will meet the requirements for any equestrian discipline.

How tight should a body protector be?

Within the range of side adjustment, you should be able to achieve a snug, yet comfortable fit over a light layer of clothing. If the body protector is tight and restrictive, you probably require a larger size.

How often should you replace body protector?

3-5 years
A well-cared for body protector has an expected life span of 3-5 years. After this period or under certain circumstances, it may still look in good condition, but the effectiveness and the level of protection it offers will deteriorate.

Should you ride in a body protector?

Body protectors are a mandatory piece of equipment for event riders in the cross country phase of a horse trial. They can also be an asset to riders who are learning to jump, or for those who are schooling young or challenging horses.

What do you wear over a body protector?

Try on over light clothing or the clothing normally worn under the body protector. Heavier garments (eg rainwear) are best worn over the BP. Adjust the garment by its fastenings at the shoulders and waist to fit snugly.

What does a body protector do?

A body protector is designed to offer a rider protection in the event of a fall from their horse. Body protectors are designed to absorb high levels of energy experience when falling off a horse, being kicked by a horse, or being stood on. Body protectors are also sometimes known as back protectors, or body armour.

How should a riding body protector fit?

There should be approximately a hands width between the saddle and the base of the body protector. At the front, the body protector should reach the breastbone at the top and cover the bottom rib by approximately 2.5cm at mid-chest, but should not cover the belly button.

Is horse height measured at the shoulder?

The height of a horse is measured from the highest point of the withers, where the neck meets the back, down to the ground.

How long does a back protector last?

Body protectors should be replaced at least every three to five years, after which the impact absorption properties of the foam may have started to decline.

Is CE Level 1 or 2 better?

Which One Is Better— CE Level 1 or Level 2 Armor? Without any doubt, the CE Level 2 motorcycle armor is better than CE Level 1. Both will serve you well in reducing impact and abrasion in the event of a motorcycle crash, but CE Level 2 will perform the best to reduce your potential accident injuries.

What are back protectors made of?

There are a variety of different constructions used in back protectors, with some being made of a soft viscoelastic foam (it hardens when hit) whilst others feature a hard shell outer covering a soft inner.

Which type of back cover is best?

For a baseline level of protection, choose a case made of a shock-absorbent material (like silicone or rubber) that covers your phone’s vulnerable corners. Shoman advises smartphone owners against plastic cases, which do not effectively absorb shock and are likelier to translate any impact to the device itself.

Which is better glass or plastic back?

Durability: Plastic is pretty tough to shatter, scratch, or dent, compared to metal and glass, making it a very durable material to build phones out of. The ever so slight flexible nature of plastic makes it a better shock absorber if you drop it, so it’s more resistant to cracks and dents.

Which back cover material is best?

Poly Carbonate and TPU
A mix of these two materials offer better protection than regular plastic cases. These materials are usually used for designing printed cases, where the back of cases are made of hard TPU, whereas the sides are of smooth poly carbonate.

What is a Level 2 body protector?

Level 2: Body protectors with this label provide a lower than normal level of protection considered appropriate for use in low-risk situations. These do not include riding on roads or other hard surfaces, riding over jumps, riding young or excitable horses or if you are an inexperienced rider.

What is a Level 1 body protector?

Level 1 (green label)
Body protectors certified to Level 1 provide a lower level of impact protection that is only considered appropriate for racing where weight is of over-riding importance and there are no requirements in place for a great level of protection.

When should you wear a body protector horse riding?

Since in the case of a fall in the open country one could sometimes hit hard ground and obstacles such as branches or road signs or stones could also increase the risk of injury, a protector is recommended when riding in the open country.