How Do You Tell If You Have A 64.5 Mustang?

Published by Clayton Newton on

The fifth digit of a Mustang’s VIN refers to the engine code. Only one engine is shared between the ‘64.5 and the ’65. For Mustangs with a K code engine, it is considered a 64.5 if it has a serial number that’s less than 25,000 from Dearborn or 125,000 if out of San Jose.

How do I know if my Mustang is a 64?

To be a ’64-1/2 at all, a Mustang has to be factory-equipped with a generator charging system, a 170ci six (U-code), a 260 2V (F-code), or a 289 4V (D-code) low-compression, large horns mounted down on the frame behind the radiator, a brake light pressure switch on the master cylinder, a center “off” heater fan switch,

What is the difference between a 1964 and a 1965 Ford Mustang?

The standard six-cylinder powered 1964.5 Ford Mustang possessed a 170 cubic-inch engine generating 101 horsepower. Later 1965 Mustangs had a 200 cubic-inch boasting a more favourable 120 horsepower.

What’s the difference between a 1964 and a half and a 1965 Mustang?

The first difference that you can easily check for is the edge around the hood. The 1964 1/2 models have what is called a “stiffening skirt” and this feature makes the edges of the hood look very different from the 1965 model which features a more rounded edge around the hood. The second difference is the gas cap.

What is a 64.5 Mustang worth?

Prices of 1964 1/2 Mustang hardtops range in price from about $6,000 to $25,000, with the average value being $18,000.

Are 1964 Mustangs rare?

Being a surviving pre-production model makes this Mustang rare. According to the Dupont Registry, only 12 1964 pre-production Ford Mustang models are known to remain. Of those, two are in England, one is in France.

Where is the VIN on 64.5 Mustang?

1964.5 Ford Mustang VIN Decoder
The VIN number is found under the hood on top of the driver’s side fender apron.

How many 64 and 1/2 Mustangs are there?

They are also known as an “early ’65”, which is a more accurate description. Only the coupe and convertible were available as early 1965 models. A total of 121,538 early ’65 (a.k.a.: “64 1/2”) Mustangs were produced between March and August of 1964, with an additional 437,913 were built as “late 1965” models.

Why is it called a 64 1/2 Mustang?

5) Because the first-year Mustang was introduced in the spring instead of in the fall, as new cars had been for years, Mustangs built before September 1964 are commonly referred to by fans of the breed as 1964-1/2 Mustangs, with cars built after being 1965 Mustangs.

What Motors came in a 64 and a half Mustang?

The 64 1/2 convertibles had a 289cid engine, and the hardtops came with the less powerful 260 V-8. Thirty five convertibles were sold to dealerships and 195 hardtops were given out in dealer contests held in April of 1964.

What engine came in a 64 Mustang?

Engine choices largely mirrored the Falcon – a base 170-cubic-inch I-6 with 101 hp; a 164-hp, 260-cubic-inch V-8; and a 210-hp, 289-cubic-inch V-8. A high-performance 289, offering 271 hp, was added to the Mustang lineup in June of ’64.

Why is there a 64.5 Mustang?

The very first generation of the Ford Mustang was launched in 1965. Ford manufactured these first generation cars in March ’64 until 1973. The few of them which came out early in ’64 are still lovingly called 1964.5 Mustang.

What colors did the 1964 Mustang come in?

The 1964 1/2 Mustang came in a variety of colors, which included: Cascade Green, Caspian Blue, Chantilly Beige, Dynasty Green, Guardsman Blue, Pagoda Green, Phoenician Yellow, Poppy Red, Prairie Bronze, Rangoon Red, Raven Black, Silversmoke Gray, Skylight Blue, Sunlight Yellow, Twilight Turquoise, Vintage Burgundy,

How do you read a 65 Mustang Vin?

Sample VIN: 5R09A201258

  1. 5 – Designates the year the vehicle was assembled.
  2. R – Designates one of three assembly plants (there are F, R and T)
  3. 09 – Designates one of three body styles (there are 07, 08 and 09)
  4. A – Designates one of seven engines used.
  5. 201258 – Designates the consecutive unit number.

How do you read a Mustang VIN number?

A typical VIN number
From left to right the first digit is the last digit of the model year, the code for the assembly plant (1 digit), body style (2 digits), engine code (1 digit), followed by the consecutive unit number. Each model year has some variation on the Mustang parts; the model years are decoded below.

How do you tell the difference between a 64 65 and 66 Mustang?

The first place to look is the Mustang’s grille. A 1965 Mustang will feature vertical grille bars. A 1966 Ford Mustang will feature the running horse without a vertical grille bar. This gives the appearance of a free floating running horse that has no visible attachments.

Did the 64 Mustang come with a V-8?

The first version of the iconic Mustang, also known as the 1964 1/2 Mustang, came with the classic recipe of engines, relying on a lineup that included both six cylinders and V8s.

When did the 1964 Mustang come out?

The Ford Mustang is officially unveiled by Henry Ford II at the World’s Fair in Flushing Meadows, New York, on April 17, 1964. That same day, the new car also debuted in Ford showrooms across America and almost 22,000 Mustangs were immediately snapped up by buyers.

How much was a 1964 Mustang new?

Mustang Prices Through The Years

Year / Model / Trim Base MSRP Adj. for Inflation
1964-1/2 Mustang Hardtop $2,368 $19,252
1964-1/2 Mustang Convertible $2,814 $22,878

Was there a 1964 Mustang convertible?

Mustang Coupe and Convertible production began in April 1964. It is still unclear as to exactly when Fastback production started, but it appears to be sometime in the summer of 1964. The first Coupes and Convertibles that were manufactured had the engine codes C, D, F, K or U.

What is the best Mustang engine?

5 Best Mustang Engines

  • 428CI Cobra Jet (1968-1970)
  • 289CI Windsor HiPo (1965-1967)
  • Boss 302CI (1969-1970)
  • Shelby Supercharged 5.8L (2013-2014)
  • Coyote 5.0L (2011-Present)
  • Power On-Demand.

Contents

Categories: Mustang