How Long Was A Ford 302 Made?

Published by Clayton Newton on

The 302 was manufactured in Windsor from 1968 to 1978. Ten years of manufacture was punctuated by several design changes, some small or larger. In 1970, the manufacturing of the engine was moved from Windsor, Ontario to Cleveland, Ohio.

How much horsepower does a 302 5.0 have?

5.0L Stock vs.
Typical of carbureted applications, the 302 produced slightly more peak power and less torque than the EFI version, with peaks of 401 hp and 370 lb-ft. The Dart heads were capable of supporting a great deal more power, but the limitation was the displacement, cam timing, and intake manifold.

What year did the 302 come out?

The 1969-70 302 H.O. engine was developed in 1968 for the SCCA’s 1969 Trans-Am road racing series. Fitted to the factory-made Boss 302 Mustangs of 1969-70, it is a unique Ford small-block featuring a thin-wall casting.

How much horsepower does a 302 have?

302 – produces 340 horsepower and 330 lb. -ft. of torque.

How much horsepower does a 1980 302 have?

1980-1981 Fox Body Mustangs
It was a 4.2-liter or 255 cubic inch variant of the 302 which had a smaller bore of 3.68 inches. Essentially, it was a scaled-down version of the 302. This engine was rated at 118 horsepower and 193 lb-ft of torque.

What year 302 had most horsepower?

The most powerful variant of the 5.0 HO came in the 1993 Ford Mustang SVT Cobra, with an impressive 235 horsepower rating. The use of the 5.0/302 V8 in production vehicles ended with the model year 2001 Ford Explorer. The final variant in the explorer had 215 horsepower.

How much HP can a stock 302 handle?

Its under-plenum air gap makes for hard cold-starts, but a car driven only in warm weather could become King of the Windsors. Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp. The vaunted 289 High-Performance engine was said to make 271 hp.

What is the smallest Ford V8 engine?

Ford 3.4-liter V8
This added roughly a liter of extra displacement and in the process created the smallest domestic V8 ever offered in a production vehicle. The 3.4-liter V8 developed 235 horsepower and 230 lb-ft of torque.

What is the difference between a 302 and 305?

The 302 Ford combined a 4.0-inch bore with a 3.0-inch stroke. This compares to a 3.736-inch bore and longer 3.48-inch stroke for the 305. The 305 Chevy is often chastised for its small bore, but under the operating conditions the stock engines were intended to run, the bigger bore is of little benefit.

What is the difference between a Boss 302 and a regular 302?

The regular Ford 302, more commonly known as a windsor 302 engine, has all the valves set up in line in a row. Whereas the boss 302, more commonly known as a Cleveland 302 engine has the valves canted, or angled in different positions.

How big can a Ford 302 make?

With an unfinished bore size of 4.120″ , Ford Performance BOSS 302 Big Bore blocks will support engine sizes up to 363 cubic inches.

What’s the difference between a 302 and a 351 Windsor?

The main difference between the blocks was the Deck Height . The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine.

What transmission goes with a 302?

For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.

What year was the last Boss 302?

The Mustang Boss 302 is a high-performance variant of the Ford Mustang originally produced by Ford in 1969 and 1970, alongside its more powerful sibling the Boss 429 Mustang. Ford revived the name for another two year production run in 2012 and 2013. It was produced for the Trans Am racing series.

Are 289 and 302 blocks the same?

A 289 and 302 block are identical for the 1968 year. The crank has a slightly longer stroke on the 302. 3″ on the 302, 2.87 on the 289. The piston has a slightly different pin height between the two engines.

How much horsepower does a 351 Cleveland have?

Factory rated at 330 hp at 5,400 rpm, this new engine was the highest output that this engine family would see. Other 351 performance engines would follow, but none would match the Boss 351.

Did Chevy ever make a 302?

The Chevrolet 302 V8 engine was produced mainly for the Camaro Z28 from 1967 to 1969 to be used in Club of America Trans Am racing. At the time in order to compete in Trans Am racing, a car’s engine had to be 305 cubic inches or less.

How much horsepower does a carbureted 302 make?

302 / 375 HP Carbureted Engine
This 302 has a Responsive throttle with a slightly more compression and Hotter camshaft than the 350 HP. Big improvement from the old 289 or early 302 engines. Will Replace most early and later model Small Block Ford Engines.

What size motor was in a 302 boss?

5.0 L
Used 2013 Ford Mustang Boss 302 Boss 302 Specs & Features

Engine
Base engine size 5.0 L
Cylinders V8
Base engine type Gas
Horsepower 444 hp @ 7,400 rpm

How much horsepower does a supercharger add to a 302?

Graph 1: EFI 302-NA vs.
After installation of the TorqStorm supercharger, the peak numbers jumped to 578 hp at 6,000 rpm and 531 lb-ft of torque at 5,500 rpm. The supercharger improved the power output of the 302 by over 200 hp! You’ll definitely notice the difference.

How high can a Ford 302 rev?

The bottom end of the 302 is the limiting factor for max revs. Standard cast crank and 2 bolt main bearing caps limit revs to about 6500.

Contents

Categories: Mustang