How Much Horsepower Does A 1969 351 Windsor Have?
Engine Basics
| Year | 1969 | 1969 |
|---|---|---|
| Displacement | 351 cu / 5.8 liters | 351 cu / 5.8 liters |
| Power (hp) | 250 hp @ 4600 RPM | 290 hp @ 4800 RPM |
| Torque (lb/ft) | 355 lb/ft @ 2800 RPM | 385 lb/ft @ 3200 RPM |
| Compression | 9.5:1 | 10.7:1 |
How much HP does a 351 Windsor have?
While the latest generation of 351 Windsors typically generated around 180-220 horsepower from the factory, adding a new set of heads, a larger cam, and some other aftermarket parts can get a Windsor with the stock stroke to around 350-400 horsepower easily.
Are 351 Windsors good motors?
Ford’s 351W engines are virtually bulletproof. The blocks, even on the 1975+ models, are very stout and will not give any problems until serious power is added. The rods, pistons, and other internal components are rock solid as well. Overall, the 351 Windsor is a tough engine and is built to take a beating.
What is the difference between a 302 and a 351 Windsor?
The main difference between the blocks was the Deck Height . The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine.
How much HP can a 351W handle?
Capable of exceeding 700 hp each, we had more than 1,400 hp worth of turbos for the 351W.
How much horsepower does a 1970 351 Windsor have?
Engine Basics
| Year | 1970 | 1970 |
|---|---|---|
| Displacement | 351 cu / 5.8 liters | 351 cu / 5.8 liters |
| Power (hp) | 250 hp @ 4600 RPM | 300 hp @ 5400 RPM |
| Torque (lb/ft) | 355 lb/ft @ 2600 RPM | 380 lb/ft @ 3400 RPM |
| Compression | 9.5:1 | 11.4:1 |
Can a 351 Windsor be supercharged?
Complete kit will mount one TorqStorm® Billet Supercharger to the passenger side of a Ford 351 Windsor.
Which motor is better a 302 or 351?
Run in this manner, the Boss 302 produced peak numbers of 374 hp at 6,700 rpm and 324 lb/ft of torque at 4,300 rpm. Stepping up to the larger Boss 351 resulted in peak numbers of 383 hp at a slightly lower 6,200 rpm and 391 lb/ft of torque at 4,000 rpm.
What’s the difference between a 351 Cleveland motor and a 351 Windsor motor?
Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal. The Windsor’s timing chain attaches to the front of the engine and has an external timing cover typically made of cast aluminum.
How much is a rebuilt 351 Windsor?
Our Price: $2,447.00
FORD 351W 75-76 5.8 V8 COMP ENGINE WINDSOR.
When did Ford stop using the 351?
A 351 cu in (5.8 L) model (stroked from the 302) was offered beginning in 1969 and continuing until 1996. The 351W (so identified to distinguish from the 335-series Cleveland 351C) uses a taller block than the other engines in the series to avoid excessively short connecting rods.
Was the boss 351 a Windsor or Cleveland?
The one-year-only Boss 351 was the ultimate factory-built Cleveland, tagged R-code and also identified as “351 H.O.” The new Boss capitalized on the Cleveland’s inherent high-rpm breathing capability with 11.7:1 compression and performance goodies that included four-bolt main bearing caps, forged pistons, shot-peened
Was the 351W fuel injected?
Since this was a street-only engine, we purposely set our engineering goals very high. We required full emissions compliance, a factory-quality idle, and the inclusion of the Ford EEC-IV factory fuel-injection system to produce at least 400 hp and 400 lb-ft of torque.
How big can you stroke 351W?
The cylinder skirts are notched to clear the Chrysler 360ci small-block connecting rods. The 351W gets stroked a half-inch by fitting the block with a 400M crankshaft (the 400M is a tall-deck Cleveland). Keep in mind the 351W has a 3.50-inch stroke while the 400M has 4 inches of stroke.
How can I get more horsepower out of my 351 Windsor?
Camshaft Upgrades
In most cases you will see top end power increases through performance camshafts on most engines. Significant gains on the 351W can be made from cam upgrades. Altering the cam profile alters the intake and exhaust durations on the engine and can dramatically change the bhp and power output.
How much is a 351 Windsor bored?
U can safely bore it to . 060″ os without any trouble.
What is the horsepower of a 1971 Boss 351?
330 horsepower
Central to the Boss 351’s personality is its 351 cubic inch HO (High Output) engine and it performs admirably. It produces a generous quantity of power for its size and yet is remarkably tractable and docile. Ford rates it at 330 horsepower (at 5400 rpm) but the proof of its energy is the way it moves the car.
How much horsepower did a 351 Cleveland Cobra Jet have?
Factory rated at 330 hp at 5,400 rpm, this new engine was the highest output that this engine family would see. Other 351 performance engines would follow, but none would match the Boss 351.
Which 351 is a big block?
351M/400
The 351C used the “Small Block” bellhousing bolt pattern. The 351M/400 used the “Big Block” bellhousing bolt pattern.
How much HP does supercharge add?
around 50-100 horsepower
How much horsepower will a supercharger add? Connecting your supercharger to the engine intake can add around 50-100 horsepower. On the other hand, a turbocharger can add around 70-150 horsepower.
How much HP does a 3.0 L supercharger add?
Product Information. The Generation 5 – 3.0L Whipple Supercharger System is a front feed, twin screw supercharger that combines Whipple’s latest technology to produce 750 horsepower and 615 lb-ft torque. That’s a whopping +290 horsepower increase over factory power output.
Contents