How Much Horsepower Does A 1970 Cutlass Have?

Published by Clayton Newton on

The 1970 Oldsmobile 442 is a second generation model that raised the bar in the muscle car horsepower race of the day. With the W30 package it was the ultimate high-performance Oldsmobile. The W30 package included the 455 CID V8, delivering 370 horsepower.

How much horsepower does a 1970 Oldsmobile 350 have?

350. Produced from 1968–1980, the Rocket 350 was entirely different from the other GM divisions’ 350s. It used a very oversquare 4.057 in (103.0 mm) bore and Oldsmobile small-block standard 3.385 in (86.0 mm) stroke for 350 cu in (5.7 L). Output ranged from 160-325 hp (119-242 kW).

How much HP does a 442 Cutlass have?

Top speed was reported as 115 mph (185 km/h). The base engine was still rated at 350 hp (261 kW), but only with the standard three-speed and optional four-speed; automatics were rated at 325 hp (242 kW).

How much is a 1970 Cutlass worth?

A fair model, which may be well run over the years will cost you around $10,000 but a mint condition model may touch around $40,000.

How much horsepower does a 1972 Oldsmobile Cutlass Supreme have?

270 horsepower
In 1972, Oldsmobile rated the L75 version of the 455 at 270 horsepower and 370 lb-ft of torque in the Cutlass Supreme Convertible.

How much HP does a 350 V8 have?

Chevy 350 Engine Specs
The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370.

How much HP is a stock 350?

However, the original Chevy 350 put out 295 HP and 380 lb-ft of torque. Another fun fact: the engine’s exact displacement is 349.85 cubic inches (5.7 L if you go by metric).

What was the fastest Olds 442?

1/10 1969 Oldsmobile 442
The 442 was Oldsmobile’s fastest offering, darting from 0-60 mph in just 5.8 seconds. This muscle car can give as much as 390 hp, making it one of the leading in the industry during its time. This legendary car was at its peak in 1969, receiving praises for its incredible handling.

How much horsepower does a 1970 Oldsmobile 442 have?

The 1970 Oldsmobile 442 is a second generation model that raised the bar in the muscle car horsepower race of the day. With the W30 package it was the ultimate high-performance Oldsmobile. The W30 package included the 455 CID V8, delivering 370 horsepower.

Is a Cutlass a muscle car?

Realistically, the answer depends on one’s individual perception of a muscle car. The purists among us would probably compare the specs and history of the Cutlass against the textbook definition of a muscle car – only to find out that the Cutlass is not one.

What year was the most popular Cutlass?

Just how remarkably popular was the Cutlass in 1977? A total of 242,874 Cutlass Supreme two-door coupes were produced.

How fast is a Cutlass?

Performance

0 – 30 mph 2.5 s
0 – 60 mph 7.0 s
Top speed 217 kph (135 mph)

What was the last Cutlass made?

The Oldsmobile Cutlass was a series of automobiles produced by General Motors’ Oldsmobile division between 1961 and 1999.

How much horsepower does a Oldsmobile 455 rocket have?

between 310 and 400hp
In 1968 Oldsmobile debuted the Rocket 455, an engine that was part of a family of 3 (with 400 and 425 cubic inch engines sharing a similar architecture). Offering between 310 and 400hp, and pushing out a spectacular 500 lb-ft of torque, the 455 big block was most famously used in the 442 muscle car.

How much horsepower does a 1970 Oldsmobile 455 have?

For 1970, with 55 more cubes on tap, the Force-Air-inducted W-30 455 was rated at 370 hp at 5,200 RPM and 500-lb. ft. of torque at 3,600 RPM. The two-bolt main block has a 4.125-inch bore and the nodular-iron crank a 4.250-inch stroke.

How much horsepower does a 1969 Oldsmobile 455 have?

Painted Toronado Peruvian Silver, these sleepers pumped out 390 hp and 500 lb-ft of torque, requiring no more race preparation than a few gallons of gasoline to clock quarter-mile times in the low 13s. For year two, Olds added show to the go.

What was Chevy’s first V8?

Chevrolet Series D
The Chevrolet Series D is an American automobile produced by Chevrolet between 1917 and 1918. Over 4,000 Series D cars were manufactured in the 1918 model year, and it was the first Chevrolet car with a V8 engine.

What is the smallest Chevy V8 engine?

The smallest displacement small block V8 ever produced included a 262-cubic-inch (4.3L) version used in the mid-1970s–the same displacement shared by the current small block-based 4.3L V 6. The largest displacement small-block for a production vehicle is the 427-cubic-inch (7.0L) LS7.

How much horsepower does a 1971 Chevy 350 have?

In 1971, it dropped to 245HP; 1972 it had 165 net HP, while 1973-1975 had 145 net HP. It was basically the 2bbl version of the L48 350. It was produced until the 1976 model year. It had 255 lb/ft (346 nm) of torque.

Can a 350 make 400 hp?

A: You can get 400 hp out of a small block 350 and keep it streetable. First, stay away from the 305 heads. They actually don’t flow very well, and since they’re cast iron, you can only go up to 9.5:1 compression.

What’s the most HP you can get out of a 350?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.

Contents

Categories: Horse