How Wide Is A 65 Mustang Rear End?
Products specifications
| Vehicle Fitment | 1964 thru 1966 Mustang: All Models |
|---|---|
| Wheel Bolt Pattern | 5 on 4 1/2″ with 1/2″ studs installed |
| Brake Space | 2.5 inch axle standoff |
| Width | 57.375 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a 65 Mustang?
1964½–1966
| Mustang 1964½–1966 | |
|---|---|
| Wheelbase | 108 in (2,743 mm) |
| Length | 181.6 in (4,613 mm) |
| Width | 68.2 in (1,732 mm) |
| Height | 51.2 in (1,300 mm) |
What rear end is in my 65 Mustang?
65-66 Mustangs come with the 7.25″ rear end, non-removable carrier.
How wide is a Ford 8 inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
How do I know if my Ford is a 9-inch?
The best test of a 9-inch carrier is to try removing the two lower carrier case bolts. If you cannot fit a socket onto these two lower bolts because the carrier is in the way, it’s a 9-inch assembly. The Ford 9-inch is desirable because it has a removable carrier, which allows quick rear end changes.
How wide is a Mustang rear end?
Most rear axles are described by their ring-gear diameters, with larger being better. A Ford 9-inch has a ring-gear diameter of, you guessed it, 9 inches closely followed by the 12-bolt at 8.875, with the Mustang rear at 8.80 inches.
How wide is a 65 inch?
TV Size to Distance Calculator and Science
| Size | Width | Height |
|---|---|---|
| 55″ | 47.9″ 121.7 cm | 27″ 68.6 cm |
| 60″ | 52.3″ 132.8 cm | 29.4″ 74.7 cm |
| 65″ | 56.7″ 144 cm | 31.9″ 81 cm |
| 70″ | 61″ 154.9 cm | 34.3″ 87.1 cm |
How do you tell if you have a 7.5 or 8.5 rear end?
The 8.5 rearend will have a round cover, and part of the cover will extend rearward to make room for the ring gear. You will also notice the large, flat, cast-in protrusions at the five and seven o’clock positions. These protrusions are larger than those on the 7.5 rearend.
What Mustang has a 7.5 rear end?
All ’79-85 Mustangs featured the 7.5 rear ends.
What is a Ford 8.8 inch rear end?
September 2022) The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle. This axle is still in production today for a variety of Ford vehicles.
What Ford had a 9 inch rear end?
Many street stock circle track and drag racers prefer the 9-inch rear found in ’66-’70 full size Fords and Mercurys, ’71-’72 Lincolns, and ’68-’72 F100 Ford trucks because it has 31-spline axles, large ball-type axle bearings and a 61″ overall width (measured from drum face to drum face).
What Ford came with a 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
What’s the difference between a 8in and a 9 inch Ford rear end?
To sum it all up, the 8- and 9-inch rears share the same basic design, they look similar, and have a lot of gear ratio and brake options to choose from, but the 9-inch is stronger. So why would anyone choose an 8-inch? That’s a good question with a simple answer-weight.
Why is the Ford 9-inch so strong?
The 9-inch Ford Rearend is the Strongest Rearend Out There—It’s All Due to “Hypoid Distance” 1] The 9-inch Ford has no differential case gear-ratio range restrictions; one differential accepts all gear ratios from the 2s through the 6s.
How wide is a Ford 9-inch axle?
These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.
Are Ford 8 and 9 axles the same?
Like the 9-inch, the Ford 8-inch is a third-member type assembly, with a “drop out” center section consisting of the differential and its carrier. The 8-inch uses axles with 28 splines, which is the same as the standard-duty 9-inch, so it has a fair amount of strength.
How wide is a 9 inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
How wide is a factory g body rear end?
58 inches
Products specifications
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
What does an 8 3 4 rear end mean?
Available as original equipment in many Chrysler cars over all platforms, the Mopar 8 3/4; is a strong rear axle assembly that is highly adaptable as a donor component. Originally introduced by Chrysler in 1957, the 8 3/4; rear was used in Chrysler car and Dodge truck and van chassis until 1974.
How much bigger is a 65 inch than a 55 inch?
In actuality, a 65-inch TV has a width of 56 inches, around 9 inches less than the advertised dimensions, while a 55-inch TV has a width of 48 inches, which is 7 inches smaller than the stated measurement. So, a 65-inch TV is 8-inches bigger in width than a 55-inch TV.
How much bigger is 65 inch vs 55 inch?
55 inch 16×9 display vs 65 inch 16×9 display
| StatsUse cm | 55 inch 16×9 | 65 inch 16×9 |
|---|---|---|
| Height | 26.96 inches | 31.87 inches |
| Area | 1292.58 inches² | 1805.34 inches² |
| As a 4:3 Display | 44.94 inches | 53.11 inches |
| As a 16:9 Display | 55.00 inches | 65.00 inches |
Contents