How Wide Is A 66 Mustang Rear End?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
| ’67-’71 Comet, Cougar | 59 11/44 |
What is the width of a 1966 Mustang rear end?
Products specifications
| Vehicle Fitment | 1964 thru 1966 Mustang: All Models |
|---|---|
| Wheel Bolt Pattern | 5 on 4 1/2″ with 1/2″ studs installed |
| Brake Space | 2.5 inch axle standoff |
| Width | 57.375 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
What size rear end does a 1965 Mustang have?
Currie® Ford 9-inch rearends for 1964 thru 1966 Mustangs and Cougars, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic muscle car or restomod build.
How wide is a 66 Mustang?
1964½–1966
| Mustang 1964½–1966 | |
|---|---|
| Length | 181.6 in (4,613 mm) |
| Width | 68.2 in (1,732 mm) |
| Height | 51.2 in (1,300 mm) |
| Curb weight | 2,445 lb (1,109 kg) (base) |
How wide is a Ford 8 inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
How wide is a Ford 9-inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
How wide is a factory g body rear end?
58 inches
Products specifications
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
What Fords had a 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
What is a 9 inch Ford rear end?
The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans.
What Mustang has a 7.5 rear end?
All ’79-85 Mustangs featured the 7.5 rear ends.
What is the rarest Mustang?
1967 Shelby GT500 Convertible
, the 1967 Shelby GT500 Convertible is arguably the rarest Mustang of them all. If you’ve never heard of this Mustang, it’s probably for a good reason—only one exists! In the mid-’60s, the GT500 convertible got held up with production issues due to lack of fiberglass.
How much are 66 Mustangs worth?
There are pristine ’66 Mustangs worth $85,000 especially if it’s a K Code convertible. Other examples that have a similar asking price include low mileage Mustangs having high-performance V8s. Not all Mustangs are super expensive as examples with the inline-six motor and an automatic tend to go around the $18,000 mark.
How many Ford Mustangs were built in 1966?
One other little known special edition called the “Anniversary Gold Mustang” is also said to have been produced, to celebrate the production of the one millionth Mustang in March 1966. It is believed that less than 50 of these Mustang hardtops were made.
| Engines: | |
|---|---|
| Wheel Covers – Knock-Off Hubs | $19 |
| Special Equipment: |
How wide is a Ford Mustang rear end?
Most rear axles are described by their ring-gear diameters, with larger being better. A Ford 9-inch has a ring-gear diameter of, you guessed it, 9 inches closely followed by the 12-bolt at 8.875, with the Mustang rear at 8.80 inches. Another strength consideration is pinion-shaft diameter.
What’s the difference between a 8in and a 9 inch Ford rear end?
To sum it all up, the 8- and 9-inch rears share the same basic design, they look similar, and have a lot of gear ratio and brake options to choose from, but the 9-inch is stronger. So why would anyone choose an 8-inch? That’s a good question with a simple answer-weight.
How wide is a 8.8 rear end?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
How wide is a 1957 Ford 9-inch rear end?
571/4 inches
Flange-to-flange dimensions on stock 9-inch rears range between 571/4 inches on the 1957-’59 station wagon axles to 68 inches on the 1972 E-series Ford vans.
How wide is a Ford 9 inch axle?
These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.
Are all Ford 9 rear ends the same?
Ford manufactured many different 9-inch rear ends over the years, and the aftermarket has picked up the same variety when putting together options.
How wide is a 66 GTO rear end?
Mid 1966 to 1972 Rear axle is about 61″ axle flange to axle flange (where brake drums butt up against), but early 66’s before about January production were only 60″.
How wide is 66 Bronco rear end?
58 inches
Previous product67-77 Bronco 9-Inch Rearend… Next product66-77 Bronco Currie 44 High…
Products specifications.
| Vehicle Fitment | 1967 thru 1977 Ford Bronco |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
Contents