How Wide Is A Factory G Body Rear End?
58 inches.
Products specifications
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
How wide is a fox body 8.8 rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’86-’93 Ford Mustang 8.8 | 59 11/44 |
| FORD | |
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
How wide is a GM 10 bolt rear end?
Many times, if you locate a 10-bolt rearend, it’s usually a 7.5-inch unit. These have been around since 1975, and were installed under cars, small trucks, and vans up to the 2005 model year.
How wide is a Ford 8 inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
How wide is Ag body?
Unless you plan to cut and narrow the rear, the Fox-body rear is by far the best choice of the bunch, since it is the closest to the factory G-body width (57.25-inches).
How wide is a Ford 8.8 differential?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
How wide is a GM 14 bolt rear end?
14 Bolt Axle Dimensions
| WMS to WMS width | Axle tube diameter | |
|---|---|---|
| SRW | 65″ | 3.375″ |
| SRW | 68″ | 3.375″ |
| DRW | 72″ | 3.5″ |
| C&C DRW | 63.5″ | 3.5″ |
How wide is a GM 12-bolt rear end?
The GM 8.875-inch, 12-bolt positraction came in many 1965 to ’72 passenger cars. The pinion shaft on passenger cars’ differentials was 1.625 inches in diameter, and the cover was oval, measuring 10.9375 inches wide by 10.625 inches tall.
How wide is a GM 10 bolt axle?
8.5-inch
The 8.5-inch pinion diameter is 1.625 inches, whereas the 8.2-inch is smaller at 1.435 inches. The 8.5-inch is often referred to as the “GM corporate 10-bolt” because of its multiple uses, and the 8.5-inch is a semi-float axle, meaning it has only one axle bearing per side, mounted inside the axle tube.
How wide is a 1970 Nova rear end?
Products specifications
| Vehicle Fitment | 62-72 GM X-body vehicles (Nova, Chevy II, Super Sport, Apollo, Omega, Ventura) with single or multi-leaf rear springs |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 62-67 = 57.875 inches / 68-72 = 60.250 inches (between wheel mounting surfaces) |
How wide is a Ford 9-inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
What Ford had a 9 inch rear end?
Many street stock circle track and drag racers prefer the 9-inch rear found in ’66-’70 full size Fords and Mercurys, ’71-’72 Lincolns, and ’68-’72 F100 Ford trucks because it has 31-spline axles, large ball-type axle bearings and a 61″ overall width (measured from drum face to drum face).
What Ford came with a 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
Are g bodies body on frame?
G-bodies are Body-on-Frame
Today’s cars are all unibody construction, meaning that the exterior sheetmetal and the underpinning chassis structure are formed and welded together as one unit to which the powertrain and suspension components are bolted.
What is an F body?
The F platform, or F-body, was General Motors’ rear-wheel drive pony car automobile platform from 1967 until 2002. It was based partially on the GM X platform, which was used for compact applications instead of the sporting intent of the F-Body.
Is an El Camino G-body?
Now riding atop what was officially dubbed the G-Body platform, the 1982 Chevy El Camino came with a 5.7-liter V8 engine, churning out 175 horsepower and 258 lb-ft of torque.
How wide is a Ford 9 inch axle?
These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.
How wide is a falcon diff?
In general, diffs become wider with successive models. For instance, the Falcon’s diff grew from 1432mm in the XK-XM to 1557mm in the EF/EL, while Holdens went from 1384mm in FX/FJ to 1555mm in the HZ/WB. An obvious departure is VL to VP Commodores — they were narrower than HT to WB Holdens.
How wide is a Dana 35?
1.18-inch
The Dana 35 axle shafts have 27 splines and a 1.18-inch diameter.
How wide is a 57 Chevy rear end?
60 inches
Products specifications
| Vehicle Fitment | 55-57 Chevy Tri-5 (120, 210, Bel Air and Delray ) Call for Station Wagons, Nomad and Sedan Delivery |
|---|---|
| Brake Space | 2.5 inches (axle standoff) |
| Width | 60 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
Is a GM 14 bolt a Dana 60?
The 14 Bolt and Dana 70 axles are Heavier Than a Dana 60
The 14 bolt axle and the Dana 70 weigh more partly because they have 3.5″ axle tubes, which are slightly larger than the 3 3/8″ tubes found on many Dana 60s.
Contents