How Wide Is A Ford 8-Inch Rear End?

Published by Clayton Newton on

The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.

How wide is a Ford 8.8 differential?

7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.

What is the difference between a Ford 8 inch and 9 inch rear end?

To sum it all up, the 8- and 9-inch rears share the same basic design, they look similar, and have a lot of gear ratio and brake options to choose from, but the 9-inch is stronger. So why would anyone choose an 8-inch? That’s a good question with a simple answer-weight.

How wide is a stock Ford 9-inch rear end?

Many street stock circle track and drag racers prefer the 9-inch rear found in ’66-’70 full size Fords and Mercurys, ’71-’72 Lincolns, and ’68-’72 F100 Ford trucks because it has 31-spline axles, large ball-type axle bearings and a 61″ overall width (measured from drum face to drum face).

How wide is a Mustang 8.8 rear end?

59 11/44
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.

Vehicle Application Axle Width (inches)
’86-’93 Ford Mustang 8.8 59 11/44
FORD
’65-’66 Mustang 57 11/44
’67-’70 Mustang 8.0 59 51/48

How wide is a factory g body rear end?

58 inches
Products specifications

Vehicle Fitment 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons)
Brake Space 2.5 inch axle standoff
Width 58 inches (between wheel mounting surfaces)

How wide is a Ford 9-inch axle?

These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.

What is the best Ford rear end?

The 9-inch Ford Rearend is the Strongest Rearend Out There—It’s All Due to “Hypoid Distance” 1] The 9-inch Ford has no differential case gear-ratio range restrictions; one differential accepts all gear ratios from the 2s through the 6s.

How do you tell if I have a 8.2 or 8.5 rear end?

Another way to tell the difference between an 8.2 and an 8.5 rearend is to pull the cover and look at the bolt holding the spider gear crosspin. If it takes a 1/2-inch wrench to remove it, it’s an 8.2. If it takes a 5/16-inch wrench to remove it, it’s an 8.5. There are several differentials for the 10-bolt rearend.

Why is a Ford 9-inch rear end so good?

The Ford 9-inch is desirable because it has a removable carrier, which allows quick rear end changes. Many racers carry an extra carrier assembly with a different rear end ratio so they can try different combinations on the same day while at the track.

How wide is a GM 12 bolt rear end?

The GM 8.875-inch, 12-bolt positraction came in many 1965 to ’72 passenger cars. The pinion shaft on passenger cars’ differentials was 1.625 inches in diameter, and the cover was oval, measuring 10.9375 inches wide by 10.625 inches tall.

What year did Ford start using 31 spline axles?

Starting in 2011, both the V6 and 5.0L Mustangs were equipped with the 31 spline 8.8″ rear from the factory.

When did Ford stop using 9 inch?

1986
It is known as one of the most popular axles in automotive history. It was introduced in 1957 model year cars and ended production in 1986, having been phased out in favor of the Ford 8.8 inch axle. However, aftermarket companies still produce the 9-inch design.

How wide is a Chevy 14 bolt rear end?

14 Bolt Axle Dimensions

WMS to WMS width Axle tube diameter
SRW 68″ 3.375″
DRW 72″ 3.5″
C&C DRW 63.5″ 3.5″
SRW Van 70″ 3.5″

How wide is a Dana 35?

1.18-inch
The Dana 35 axle shafts have 27 splines and a 1.18-inch diameter.

What is the ratio of a Ford 8.8 rear end?

Ford 8.8 Inch 3.55-5.13 Ratio.

How wide is a C4 Corvette rear end?

An 84 to 89 C4 rear axle is 62.5 inches from tire-mount surface to tire-mount surface. The 90 to 96 axles are -inch wider.

How wide is 66 Bronco rear end?

58 inches
Previous product67-77 Bronco 9-Inch Rearend… Next product66-77 Bronco Currie 44 High…
Products specifications.

Vehicle Fitment 1967 thru 1977 Ford Bronco
Brake Space 2.5 inch axle standoff
Width 58 inches (between wheel mounting surfaces)

Why are they called G-body cars?

The General Motors G platform (also called G-body) was an automobile platform designation used for mid-sized rear-wheel drive cars. It made its first appearance from the 1969 to 1972 model years, adapted from GM’s A-body, and reappeared from 1982 to 1988.

Is a Ford 9-inch a Dana 60?

The main difference between a GM 12 bolt rear end, the Ford 9″ rear end and the Dana 60 rear end is the size (and strength) of the ring gear. The 12 bolt rear end has a 8.875″ ring gear, the Ford 9″ of course has a 9″ ring gear and the Dana 60 has a massive 9.75″ ring gear.

How much HP can a Ford 9-inch handle?

Rated for a maximum of 650-hp, it features a Strange nodular-iron case, Eaton TrueTrac differential, 31-spline axles, Daytona pinion support, Ford SVO seals, a 1350 U-bolt driveshaft yoke or pinion yoke, and ARP hardware.

Contents

Categories: Mustang