Is There A 429 Cobra Jet Engine?

Published by Clayton Newton on

The ’71 429 Cobra Jet hit the option sheet with an aggressive flat-tappet hydraulic cam, stamped bolt/fulcrum rockers, 715-cfm Rochester Quadrajet carburetion, dual-plane “spread-bore” iron manifold, four-bolt main block, and large-port cylinder heads to make a factory rated 370 horsepower and 450 lb-ft of torque.

How much horsepower does a 429 Super Cobra Jet have?

370 hp
With a 4.36-inch bore and shorter 3.59-inch stroke than the 460, the 429-cu-in Cobra Jet promised at least 370 hp thanks to its snappy 11.3:1 compression ratio, and it became the go-to power plant for the late-’60s Fords.

What year did the 429 Cobra Jet come out?

In 1971, Ford offered the Super Cobra Jet 429.

What Mustang had a 429 Cobra Jet?

When you restore a ’71 Mach 1, there’s no need to gild the lily. With its NASA hoodscoops for ram air and a 375hp 429 Cobra Jet, the last of the first-generation restyles is a hot musclecar that turns heads in traffic. This one has the in-dash, 8,000-rpm tach and the Instrumentation Group.

What engine does the Cobra Jet have?

The engine propels the iconic Cobra Jet dragster to speeds in excess of 150-mph on way to a mid-eight second quarter-mile run. It is a special 5.2-liter version of the Blue Oval’s famed 5.0-liter V8, strengthened and outfitted with a 3.0-liter Whipple supercharger.

What is the difference between a 429 Cobra Jet and a 429 Super Cobra Jet?

The assembled Super Cobra Jet short-block demonstrates what makes an SCJ a standalone high-performance engine. Both the Cobra Jet and Super Cobra Jet use the same block, crank, and rods. Where they differ is camshaft, valvetrain, and induction.

What is Ford’s biggest V8 engine?

The Ford Motor Company has built nearly every kind of V8 engine we can imagine over the past century, but the biggest was the 1100 CID GAA tank engine of World War II.

Is there a 427 Cobra Jet engine?

From the block, to the crank, to the rods, to the induction system, the 427″ Cobra is built to be an all-conquering powerhouse, yet is still a street engine that runs on 91-octane pump gas.

What makes a Ford engine a Cobra Jet?

In 1968 Ford kept the 428 in the picture but added the Super Cobra Jet option, which upgraded the crankshaft and connecting rods to better handle the stress of regular drag racing punishment.

How much is a 1970 Torino 429 Cobra Jet worth?

This beautifully restored 1970 Ford Torino Cobra 429 SCJ Drag Pack is offered by North Shore Classics for just $85,000.

What cars came with the Cobra Jet?

The 428 CJ was offered in Mustang fastbacks and coupes (and in Ford Torino and Mercury Cougar and Cyclone models) with a four-speed manual or three-speed automatic. All 1968 Ford Mustang 428 Cobra Jets had beefed-up front shock towers and Polyglas F70X14 tires.

What is the rarest Mustang?

1967 Shelby GT500 Convertible
, the 1967 Shelby GT500 Convertible is arguably the rarest Mustang of them all. If you’ve never heard of this Mustang, it’s probably for a good reason—only one exists! In the mid-’60s, the GT500 convertible got held up with production issues due to lack of fiberglass.

What is John Wick’s car?

John Wick’s Car is a 1969 Ford Mustang Boss 429, an American muscle car produced by the Ford Motor Company. It has a Boss 429 engine, with upwards of 374 horsepower.

Did Ford make a 351 Cobra Jet?

The Q-code 351 “Cobra-Jet” (also called 351-CJ, 351-4V) was produced from May 1971 through the 1974 model year. It was a lower-compression design that included open-chamber 4V heads.

What size was the Cobra Jet engine?

428-cubic-inch
Mustang Cobra Jet timeline
1968 – Original FE 428-cubic-inch V8-powered Cobra Jet is created: Ford produces 50 lightweight Mustangs to hold the 335-horsepower engine; six are shipped to Holman Moody and Bill Stroppe to be prepared for NHRA competition.

How much horsepower does a 427 Cobra Jet have?

Horsepower: 410 bhp (485 bhp in Competition Model) @ 6,000 rpm. Torque: 480 lb-ft @ 3,700 rpm. Drivetrain: Rear-wheel Drive. Transmission: Four-speed Borg-Warner Manual Transmission.

How much horsepower did a 428 Super Cobra Jet have?

335 hp
With the Muscle Car horsepower race escalating for the 1968 season, Ford Motor Company introduced its all-new 428-cubic inch Cobra Jet engine. With 335 hp, the potent 428 CJ offered a huge leap in power over the smaller 390-cube V8, which was the top Mustang engine for 1967.

How much horsepower can you get out of a 428 Cobra Jet?

22 Though some claim the 428 CJ actually made in excess of 400 hp, we observed 365.1 hp at 4,800 rpm, almost 10 percent more than advertised. After some break-in miles, we’d likely see 375 hp and, with headers, yes, very likely 400 ponies.

When did Ford stop making the 429 engine?

The Boss 429 Mustang only ran in 1969 and 1970, selling some 1,359 (including two Boss 429 Cougars) units before killing the model. In NASCAR, the engine was used in the Torino Talladega and Mercury Cyclone Spoiler II for 1969 and 1970. Unceremoniously, the Boss 429 was killed off by Ford in 1971.

How much horsepower does the 7.3 Godzilla have?

But last year, Ford Motor Company did just that when it released its new 7.3L gasoline V8 dubbed “Godzilla.” The big V8 is designed for Super Duty trucks and produces 430 horsepower at 5,500 rpm and best-in-class torque with 475 ft.

What is the strongest Ford engine?

The ‘Voodoo’ engine offered up a whopping 526 hp and 429 lb-ft of torque, and set the stage for the supercharged variant dubbed the ‘Predator,’ which churns out 760 hp in the Mustang Shelby GT500.

Contents

Categories: Mustang