What Are Horseboxes Made Of?
Most have a floor made of exterior/marine plywood, with rubber matting on top. More expensive horseboxes have floors made from aluminium planking – this is better, as it’s generally stronger and lighter. When inspecting a wooden floor, lift up the matting and look underneath for signs of rot.
What are horsebox sides made of?
Where aluminium is used in horseboxes, its failing tends to be that it does not ‘play well’ with other metals and can rot at a much accelerated pace when used incorrectly. Sadly, much of the damage we see is either from corner cutting by a manufacturer or simply poor engineering knowledge at the construction stage.
What is best flooring for a horsebox?
Most horsebox conversions will have the original delivery body flooring made from either 18mm WISA plywood or 25mm Keruing hardwood from Malaysia, both are excellent and long lasting products.
Do Oakley make Horseboxes?
Investing in an Oakley horsebox, you forge a long-lasting relationship with an organisation committed to after sales support. To assist you in keeping your Oakley vehicle in optimum condition, we offer a comprehensive range of services.
What is the bulkhead on a horsebox?
Bulkhead – the partition between the cab and horse area. All John Oates horseboxes have a reinforced structural bulkhead that is tied into both the cab and horsebox body. This is an important safety feature that protects the occupants in the cab from the horse in the event of a sudden stop.
What are Ifor Williams side panels made of?
composite aluminium/plywood
The trailer range features a brushed aluminium frame, lowered aluminium skirt running around the front of the trailer chassis, with sides and ramps made using composite aluminium/plywood side panels.
What metal are horse trailers made of?
Composite horse trailers are usually constructed on a steel or steel-pipe frame, with aluminum clad sides and a fiberglass roof and exterior panels and fenders. Aluminum diamond plate is often installed at the front of the trailer to prevent damage from road gravel.
What should horse barn floor be made of?
Some commonly used flooring materials include clay, sand/ clay mixture, limestone dust, wood, concrete, asphalt, and rubber floor mats. Topsoil should be removed before starting to build the stall floors to minimize settling. Hard packed clay flooring is used widely and requires relatively high maintenance.
Are Horseboxes MOT exempt?
You must get an annual test (MOT) for your horsebox. Having your horsebox properly checked and serviced by a qualified mechanic before the annual test will help to ensure it is in good enough condition to pass.
What type of wood do you use a the floor of a horse trailer?
Wood Floor: Most wood floors in new trailers are pressure treated 2×6′ southern pine wood planks. Pine does not warp over time such as oak and is a lighter weight. There are various grades of pine. Number one grade means fewest knots.
Where are Oakley Horseboxes made?
Oakley Horseboxes
Their trucks are produced in England, but exported to all over Europe, the Middle East, Asia and the US.
How much do Horseboxes weigh?
Payloads can vary in 3.5 Tonne horseboxes- but are generally between 750-1100 kilos. So… average 16.2 Horse weighs approximately 680 kilos, two passengers at 80 kilos each, 25 kilos of tack would give you a total weight of 865 kilos.
Are Horseboxes braked?
Horsebox air brakes simplified operation
From the driver seat, horsebox air brakes have a foot brake and hand brake that basically work in the same way as your car.
How long does a wood bulkhead last?
15-20 years
Typical wooden bulkheads only last 15-20 years, bulkheads with vinyl sheeting, it can reach 25 years in some cases. With both vinyl and wooden sheet systems, you still have a wooden structure which is vulnerable to rot.
What are the 3 types of bulkhead?
To summarize we separated them into three major categories, each with its sub-categories.
- By position.
- Transverse.
- Longitudinal.
- By purpose.
- Watertight.
- Non-watertight.
- Collision.
- Insulation.
Can you sit in the back of a horsebox?
If you own one of the larger, coach-built horseboxes, you’ll probably have a comfortable seating area at the rear. This provides a great space to sit, eat and entertain when you’re at shows, events or competitions. But be very careful about sitting in this space when the vehicle is on the move.
What is the best wood for trailer sides?
Rough oak is used for trailer decking primarily for its strength. Oak is one of the only decking materials recommended for use with tracked equipment such as skid steer loaders and excavators. In the trailer industry, oak decking is referred to as “rough” oak for a reason.
Are 4 star horse trailers all aluminum?
4-Star has established the all aluminum trailer as the industry standard for ease of maintenance and overall superiority. We’re dedicated to constant innovation, and we’re always looking to the future to incorporate the state-of-the-art while maintaining the traditions that have been the bedrock of our success.
What are Ifor Williams horse trailers made from?
The floor, sides and rear ramp of the HBE range are all manufactured purely from aluminium planking, this provides clean modern lines and means the trailer is easy to tow as it is made from aluminium.
How do I know if my trailer is steel or aluminum?
Expert Reply: You can perform the old magnet test to determine if your trailer wheels are aluminum or steel. The magnet will not stick to aluminum wheels. Also, If your wheel is painted or shows some rust, that is a good indication that it is a steel wheel.
What is better galvanized steel or aluminum trailer?
Galvanizing will dull over time and may not be as visually appealing as painted or aluminum trailers. Galvanized trailers are a higher cost option than painted, but will always tend to last longer under normal conditions. Aluminum trailers are suited for salt water use as they offer extreme corrosion resistance.
Contents