What Gear Ratio Is In A 2006 Mustang Gt?
2.73-3.31.
The majority of Mustangs come with a ratio of 2.73-3.31 from the factory.
What rear end is in a 2006 Mustang GT?
The 2005-2010 V8 Mustangs with 8.8” rear ends used 31 spline rear axles.
What gear ratio does Mustang GT have?
What Gear Ratio Should I Buy? Most owners tend to choose a 3.55, 3.73, or 3.90 for a Mustang that is daily driven. If you are serious about speed, then you might consider the 4.10 or a 4.30.
What does 1 2 3 mean on a Mustang?
N – Neutral. D – Drive. 3 – Third gear 2 – Second gear 1 – First gear. O – Overdrive (if equipped)
How can you tell if you have 3.73 gears?
if the driveshaft turned 3 3/4 revolutions for two rotations of the tire, you have a 3.73 gear.
What size rear end is in a 2006 Mustang GT?
From 1986-2010, the Ford Mustang 8.8” rear end would be used for all V8 Mustangs, and the Ford 7.5” rear end was installed into all 4-cylinder (2.3L) and V6 Mustangs (3.8L).
What gear ratio does a Ford 8.8 have?
Ford 8.8 Inch 3.55-5.13 Ratio.
What is a 6.2 1 gear ratio good for?
6.2:1 to 6.5:1 – We personally use this speed range anytime we are tossing spinnerbaits, throwing jerkbaits, shallow running and lipless crankbaits, early season swim jigs, vibrating jigs and swimbaits / umbrella rigs.
What is a 3.73 gear ratio good for?
So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21. But it will also use more fuel in all situations because the engine’s rpm will be higher.
Are 3.73 or 4.10 gears better?
3.73 VS 4.10 Ratio
3.73 Ratio | 4.10 Ratio |
---|---|
Not as fast off of the line | Quicker Off The Line |
Lower Torque | Higher Torque |
Better Gas Mileage | Decreased Gas Mileage |
Higher Top Speed | Lower Top Speed |
What is the rarest year of Mustang?
1967
1967 Ford Shelby GT500 Convertible
When Ford brought production of Shelby Mustangs in-house, Ford never got around to making the 1967 GT500 convertibles, leaving this rare single version as the only one ever built.
What Mustang is in John Wick 1?
1969 Ford Mustang Boss 429
John Wick’s Car is a 1969 Ford Mustang Boss 429, an American muscle car produced by the Ford Motor Company. It has a Boss 429 engine, with upwards of 374 horsepower.
What is the difference between PP1 and PP2 Mustang?
Mustang PP1 vs PP2
It includes the upgrades from the Performance Package (PP1), plus some notable additions: Standard MagneRide suspension. Stickier Pilot Sport Cup 2 tires. Track calibration.
Is 3.55 or 3.73 gears better?
PERFORMANCE: The larger the axle ratio number, the quicker the truck will accelerate. For example, a truck equipped with 3.55:1 axle gearing will accelerate faster than one equipped with a 3.31 axle ratio. Similarly, a pickup with a 3.73 axle ratio will be faster than one with 3.55s.
What is a 5.2 1 gear ratio good for?
The low gear ratios like 5.2:1 and 5.3:1 are great for fishing baits that pull hard like deep crankbaits, big swimbaits, and deep water spinnerbaits. The low gear ratio helps you reel the bait slower, keeping it in the strike zone longer when fishing moving baits in the deep water.
What happens if the gear ratio is too high?
A gearing ratio higher than 50% is typically considered highly levered or geared. As a result, the company would be at greater financial risk, because during times of lower profits and higher interest rates, the company would be more susceptible to loan default and bankruptcy.
How strong is a 8.8 rear end?
This rearend is lighter than a 9-inch and is as strong as a 12-bolt (except for the axles), and many Mustangs came from the factory with Traction-Lok limited-slip differentials.
Are all Ford 8.8 rear ends the same?
There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter). The 31-spline axles (1.29 inches in diameter) are more desirable but far less common.
How do I know if I have an 8.8 or 9.75 rear end?
On the passenger’s side upper and lower corners, there’s two semi-circular divots that can easily be seen when looking at the cover from straight on. While the Super 8.8’s cover has a bulge for the ring gear, it’s not anywhere near as pronounced as the 9.75’s.
What Ford came with a 8.8 rear end?
8.8 IRS (Independent Rear Suspension)
The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.
What is a 6.4 1 gear ratio good for?
The higher the number, the more line that can be retrieved within the same amount of work. The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow.
Contents