What Is A 4.6 Ford Engine Equivalent To?
The 4.6 liter engine was the replacement for the Windsor family of Ford V8’s. Having been introduced in the 1962 Ford Fairlane as the 221 cubic inch V8, the Windsor engines would ultimately be found in many familiar sounding sizes (289, 302, and 351) and would power everything from Falcon’s to F-350’s.
Are 4.6 and 5.4 engines the same?
At a glance, it is challenging to tell the difference between a 4.6L iron block and a 5.4L. Where these blocks differ is deck height with the same cylinder bore size. The 5.4L block has a taller deck. It is also long on beefcake down under for strength.
What size motor is a 4.6 V8?
The 4,601 cc (4.6 L; 280.8 cu in) displacement 90-degree V8 has been offered in 2-valve SOHC, 3-valve SOHC, and 4-valve DOHC versions. The engines were also offered with both aluminum and cast iron blocks, depending on application.
How much HP does a 4.6 V8 have?
The Ford 4.6L V8 was produced from 1990 through 2014 and has been used in many different vehicles over the years. The horsepower figures from the engine range from 205 through 302 horsepower depending on the vehicle it was in. The horsepower figures also typically increased over the years.
How much horsepower does a 4.6 liter have?
Ford 4.6L SOHC V-8
Ford | |
---|---|
4.6L SOHC V-8 | |
Horsepower (SAE net) | 300 @ 5,750 rpm |
Torque | 320 lb.-ft. (434 Nm) @ 4,500 rpm |
Specific output | 65 hp/L |
Is the 4.6 A coyote engine?
The latest version of Holley’s Terminator X and Terminator X Max is aimed at 2011-2017 Coyote engines, along with 4.6 and 5.4 Two-Valve and Four-Valve engines.
What year 4.6 had the spark plug problems?
2004-2008
This article describes a particularly frustrating spark plug issue with the 2004-2008 Ford 4.6-liter, 5.4-liter, and 6.8-liter 3-valve “modular” engines.
Is a 4.6 Ford engine a 289?
The 4.6 liter engine was the replacement for the Windsor family of Ford V8’s. Having been introduced in the 1962 Ford Fairlane as the 221 cubic inch V8, the Windsor engines would ultimately be found in many familiar sounding sizes (289, 302, and 351) and would power everything from Falcon’s to F-350’s.
What are the most common problems in a 4.6 Ford engine?
4 Common Ford 4.6 Engine Problems
Timing chain. Intake manifold. Oil pressure sending unit. Misfires.
How many miles is a Ford 4.6 good for?
It seems that they either seize before they get off of the transport truck (brand new) or run 200,000 miles with regular service. The 4.6L engines I work with are serviced religiously and run well over 150,000 mile in SEVERE service. The car wears out long before the engines do. 35 people found this helpful.
How much horsepower can you get out of a 4.6 Ford?
4.6L Mustang Engine Power Limits
For 4.6 engines with 2 valve heads (2 valves per cylinder), the power limit is around 400 rwhp.
Is a 4.6 L V8 engine fast?
While the 4.6L engine wasn’t designed for a supercar by any means, it was noticeably faster than similar engines of the past. The 4.6L went from 0 to 60 mph 1.5 seconds faster than the popular 5.0L (302 ci) V8 engine, used in comparable vehicles of the past.
What Ford vehicles have a 4.6 V8?
Ford 4.6L Engine – Vehicle Applications
Vehicle | Transmission |
---|---|
Ford Expedition (1997 – 2004) | Four-speed automatic |
Ford Explorer (2002 – 2010) | Five-speed automatic |
Ford Explorer Sport Trac (2006-2010) | Six-speed automatic |
Ford F-150 (2000 – 2010) | Four-speed automatic / Six-speed automatic |
What is the horsepower of a Ford 5.0 liter engine?
395 HP
5.0L Ti-VCT V8
Horsepower | 395 HP |
---|---|
Max. Towing Capacity | 11,500 lbs. |
Max Payload Capacity | 3,270 lbs. |
MPG (city/hwy) | 17/23 |
Available Axle Ratios | 3.15, 3.31, 3.55, 3.73 |
Is the 4.6 Triton motor a good motor?
The 4.6 lt Ford engine with the 2 or 3 valve OHC ( single overhead cam ) is extremely reliable and durable. On trucks there were issues with exhaust manifold studs breaking . also the three valve engines had spark plugs that could be very difficult to remove, but a special tool made for that purpose works really well.
Is a 5.0 the same thing as a Coyote in a Mustang?
No Replacement for Displacement
So, in 2011, Ford gave the Mustang GT one of the biggest performance upgrades it’s ever seen. The old SOHC 4.6 was gone, and in its place a new DOHC, 32-valve V8 that once again displaced 5.0L, or 4,951cc to be exact. It was called the Coyote.
What is so special about the Coyote engine?
The first generation Coyotes could produce up to 412 hp and 390 pounds of torque. When compared to other engines in terms of size and output, the Coyote performs admirably well. For instance, the first-generation 5.0L Coyote engine could produce as much power as a 6.4L Hemi with much less displacement.
When did they stop putting 4.6 in the Mustang?
2004
The Two-Valve 4.6L would remain largely unchanged through 2004, after which it was phased out of the Mustang for the Three-Valve 4.6L engine. Ford continued to use the Two-Valve in many of its other models for years to come.
What spark plugs does Ford recommend?
All the right spark plugs, recommended by Ford Motor Company
Motorcraft® spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.
What year did the 4.6 Get PI heads?
The combination of the two, heads and intake, resulted in the 35 HP increase. Today, all Mustang GT V8 engines from 1999-2004 are the PI engine, whereas 1996-1998 4.6’s are referred to as NPI (non performance improved) engines.
How many cubic inches is a 4.6 liter V8?
281 Cubic Inches / 4.6 Liters.
Contents