What Is A 5.2 1 Gear Ratio Good For?

The low gear ratios like 5.2:1 and 5.3:1 are great for fishing baits that pull hard like deep crankbaits, big swimbaits, and deep water spinnerbaits. The low gear ratio helps you reel the bait slower, keeping it in the strike zone longer when fishing moving baits in the deep water.

What does 5.2 1 mean on a fishing reel?

Using a gear ratio of 5.2:1, for example, the 1 represents one complete turn, or one revolution (360^o) of the handle. For baitcasting reels, the 5.2 represents how many complete times the spool turns with one turn of the handle. For spinning reels, it’s very similar—instead of the spool turning, it’s the rotor.

What is a 5.0 1 gear ratio good for?

Slow. A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure.

What is the best gear ratio for a real?

A gearing ratio lower than 25% is typically considered low-risk by both investors and lenders. A gearing ratio between 25% and 50% is typically considered optimal or normal for well-established companies.

What is the best gear ratio for a spinning rod?

5.2:1 to 6.2:1
Most spinning reels feature a gear ratio of 5.2:1 to 6.2:1 although some manufacturers are now offering models with a 7.0:1 gear ratio for bass anglers who want to quickly retrieve drop shot rigs or tube baits when fishing in deep water.

What is a 5.4 1 reel used for?

Low gear ratio reel | 5.1:1 thru 5.4:1
A lower fishing gear ratio reel is ideal for big baits that pull a lot, such as deep crankbaits. These reels have the highest amount of torque, allowing you to put less effort into retrieving the bait and more energy towards finding the fish.

What is a fast gear ratio for fishing?

Anglers typically divide gear ratios into three categories: slow, medium and fast. Roughly speaking, “slow” reels have ratios below 6:1; medium reels are 6 to just under 7:1 and fast reels are 7:1 or faster.

What gear ratio is good for hills?

You will need even lower gear ratios for steep hills that are 8% or more. The most preferred gear ratios on such tracks are 50/34, 40/34, 36/40, 34/36, 34/32, 34/30, and 32/20. However, remember that using gears with such a low ratio will cause you to pedal more, but it will require less effort.

What gear ratio is best for street racing?

If we have a daily driver, 2.55 to 3.25 gear ratios typically work best, whereas a street/strip application we would usually use a 3.42 to a 3.90 gear ratio, and race applications most commonly use a 4.10 and above gear ratios.

What gear ratio is better for torque?

Gear ratios can be boiled down to a single statement: Higher ratios (with a lower numerical value) give better torque/acceleration and lower ratios allow for higher top speeds and better fuel economy. Higher ratios mean the engine has to run faster to achieve a given speed.

What gear ratio gives more speed?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential. This is known as the final drive, differential gear, Crown Wheel Pinion (CWP) or ring and pinion.

Is a 5.1 1 gear ratio good?

A low gear ratio reel of 4.4:1 – 5.1:1 is the right gear ratio range. It works best for heavy, slow-rolling lures and has enough torque to handle a trophy fish –no issue.

What is the hardest gear ratio?

The Hardest Gear
This is expressed as 4.55 : 1 meaning that for every 1 turn I make of the pedals at the front, I will turn the back wheel 4.55 times. This is the gear I would use on the flat. It is going to take quite a lot of effort to get it moving, but when I do I will move quickly.

What axle ratio is best for speed?

If you are looking for quicker, more nimble performance, an axle ratio of around 3.55 will be ideal. This will cause the engine to make more revolutions per minute and will require less of the throttle to get up to speed.

What is the best rod for distance casting?

• Shimano – Tribal TX7 Rod: Best for Fishing in Big Fish Waters.
• Shimano – Tribal TX5 Rod: Best for Improved Casting.
• Daiwa – Infinity X45 2PC Rods: Best for Accuracy.
• Shimano – Tribal TX Ultra Rod: Best Carp Rod All-Around.
• Daiwa – Basia X45 TT Alps Gunsmoke K Guides (TFT Exclusive): Best for a Custom Standard.

Is a higher gear ratio better for bigger tires?

If the Tires Are Bigger, the Gears Should Be Lower.

What gear ratio is best for swimbaits?

The Right Reel For The Right Situation
In nearly all cases I like to use a 5:1 gear ratio reel for swimbaits. This slow retrieve reel enables me to have a slow, subtle and realistic movement with these lifelike lures. Some would say ‘well just get a faster 7:1 gear ratio reel and wind it slower’.

What is the best gear ratio for Baitcasters?

The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.

What is a size 4000 reel good for?

4000 and 5000. Medium size reels are very popular as they provide access to various fishing applications. As well as covering everything inshore, you also have good surf access, rock access, as well as access to lighter pier fishing. They’re great in saltwater and freshwater, land-based, or afloat.

What is the best gear ratio for pulling heavy loads?

3.73
FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.

What is a 6.2 1 gear ratio good for?

6.2:1 to 6.5:1 – We personally use this speed range anytime we are tossing spinnerbaits, throwing jerkbaits, shallow running and lipless crankbaits, early season swim jigs, vibrating jigs and swimbaits / umbrella rigs.