What Is The Best Gear Ratio For A Mustang?

The gold standard for automatic Mustangs is an axle ratio of 4.10:1.

What is the best gear ratio for Mustang GT?

What Gear Ratio Should I Buy? Most owners tend to choose a 3.55, 3.73, or 3.90 for a Mustang that is daily driven. If you are serious about speed, then you might consider the 4.10 or a 4.30.

What gear ratio is best for performance?

In the real world, typical street machines with aspirations for good dragstrip performance generally run quickest with 4.10:1 gears. Lower gears are required if the car is very heavy, or if the engine makes its power at the upper end of the rpm scale.

Are 3.73 or 4.10 gears better?

ARE 3.73 OR 4.10 GEARS BETTER? Use this rule of thumb: The shorter the gear ratio (higher number), the easier it will be for the vehicle to start moving and accelerating! This will, however, lower the top speed of the vehicle.

What gear ratio is best for highway?

If getting the best fuel economy is priority, then choose the lowest numerical number offered, such as 3.08, 3.23 or 3.31. This applies to highway driving; city driving mpg isn’t really affected by the axle ratio. If you do a mix of both, go with the “standard” axle ratio offered by the manufacturer.

What is a 5.0 1 gear ratio good for?

A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure.

What is a 7.0 1 gear ratio good for?

So, buying a reel with a 7.0:1 gear ratio, which retrieves line pretty quickly, might be good for covering lots of water with a spinnerbait to locate active fish.

What is a 3.90 gear ratio?

Technically, ratios should be written as 3.90:1 , which means the driveline turns 3.9 times for every one turn of the wheels. So, the lower the axle ratio, the faster the truck will move. An axle’s ratio is determined by the number of teeth on the ring gear and the pinion gear.

Is 4.10 a high gear ratio?

If the 4.10 ratio applies to the rear end gears in a car, it means the car’s driveshaft turns 4.1 times for ever one revolution of the rear tires. The 4.10:1 ratio was farely popular in cars back in the ’40’s and ’50’s but is way too low for modern vehicles.

Are 3.73 gears good?

They were terrible for the powerband of the V10, which is very high. The 3.73 gears kept the engine OUT of the powerband more often than in it and it made for a miserable towing experience and poor fuel mileage. I switch to a 5.13 gear set and found 1 more mpg when towing and had much better towing performance overall.

What do 3.91 gears do?

This 3.91 Performance Gear Kit Package offers a lower (higher numerically) ratio rear drive gear, which will increase effective rear wheel torque multiplication (TM) in 2010-2013 SS Camaros.

What is a 4.10 axle ratio good for?

Pickups towing big 5th wheel trailers do well equipped with 4.10:1 axle ratios. The thinking behind the decision to stick with the base axle ratio, which is typically 3.08:1 or 3.42:1, is the ratio comes standard, so that’s what the vehicle manufacturer feels is the best setup.

What diff ratio is faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

What gear ratio is best for uphill?

You will need even lower gear ratios for steep hills that are 8% or more. The most preferred gear ratios on such tracks are 50/34, 40/34, 36/40, 34/36, 34/32, 34/30, and 32/20. However, remember that using gears with such a low ratio will cause you to pedal more, but it will require less effort.

What gear ratio is better for torque?

Gear ratios can be boiled down to a single statement: Higher ratios (with a lower numerical value) give better torque/acceleration and lower ratios allow for higher top speeds and better fuel economy. Higher ratios mean the engine has to run faster to achieve a given speed.

What is the hardest gear ratio?

The Hardest Gear
This is expressed as 4.55 : 1 meaning that for every 1 turn I make of the pedals at the front, I will turn the back wheel 4.55 times. This is the gear I would use on the flat.

Is a 1 to 1 gear ratio good for climbing?

On the road, a 1:1 gear or lower makes almost any climb possible for almost any rider, but you have to remember that you will be travelling more slowly and a major climb could take well over two hours.

What is a 6.2 1 gear ratio good for?

6.2:1 to 6.5:1 – We personally use this speed range anytime we are tossing spinnerbaits, throwing jerkbaits, shallow running and lipless crankbaits, early season swim jigs, vibrating jigs and swimbaits / umbrella rigs.

Is 3.55 or 3.73 gears better?

PERFORMANCE: The larger the axle ratio number, the quicker the truck will accelerate. For example, a truck equipped with 3.55:1 axle gearing will accelerate faster than one equipped with a 3.31 axle ratio. Similarly, a pickup with a 3.73 axle ratio will be faster than one with 3.55s.

What is an 8.1 1 gear ratio good for?

High gear ratio reels | 7.1:1 thru 8.1:1
Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high-speed reel. These techniques create a lot of slack in your line, and if you get a bite 25 yards out from the boat, a high gear ratio comes in handy for getting a solid hookset.

What is a 6.8 1 gear ratio good for?

It will be a good all around reel. I’d use it for spinnerbaits and chatterbaits. It’s very close to 7:1 and if the IPT (inches per turn) are high it could make a great pitching reel.