What Is The Width Of A Ford Mustang Rear End?
Most rear axles are described by their ring-gear diameters, with larger being better. A Ford 9-inch has a ring-gear diameter of, you guessed it, 9 inches closely followed by the 12-bolt at 8.875, with the Mustang rear at 8.80 inches.
What is the width of a Ford 8.8 rear end?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
How wide is a 2005 Mustang rear end?
Track width, front/rear 61.9 in. / 62.5 in. 62.4 in. / 63.0 in.
What size rear end does a 1965 Mustang have?
Currie® Ford 9-inch rearends for 1964 thru 1966 Mustangs and Cougars, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic muscle car or restomod build.
What size rear end does a 1966 Mustang have?
65-66 Mustangs come with the 7.25″ rear end, non-removable carrier.
How wide is a Ford 9-inch rear end?
The 9” rear axle was manufactured in seven different housing widths, from 57-1/4” to 69-1/4” wide, any of which may be ideal for a particular chassis.
How wide is a Ford 8-inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
How wide is a factory g body rear end?
58 inches
Products specifications
Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
---|---|
Brake Space | 2.5 inch axle standoff |
Width | 58 inches (between wheel mounting surfaces) |
What Mustangs have the 7.5 rear end?
All ’79-85 Mustangs featured the 7.5 rear ends.
What is a Ford 8.8 inch rear end?
September 2022) The Ford 8.8 is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1983 Ford trucks. The axle was developed to replace the Ford 9-inch axle. This axle is still in production today for a variety of Ford vehicles.
What Fords had a 9 inch rear end?
Common applications
- 1957-1986 Ford F-100 & F-150.
- 1958-1960 Edsel (All series including Wagons)
- 1976-1980 Ford Granada.
- 1976-1979 Lincoln Versallies.
- 1957-1970 Ford Fairlane.
- 1957-1971 Ford Thunderbird.
- 1964 1/2-1973 Ford Mustang.
- 1966-1983 Ford Bronco.
What is a 9 inch Ford rear end?
The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans.
How do you tell if you have a 7.5 or 8.5 rear end?
The 8.5 rearend will have a round cover, and part of the cover will extend rearward to make room for the ring gear. You will also notice the large, flat, cast-in protrusions at the five and seven o’clock positions. These protrusions are larger than those on the 7.5 rearend.
What does a 4.10 rear end mean?
Gear Ratio: the ratio of the ring and pinion gears in the rear axle. So, if you have a 4.10:1 (sometimes 4.10) rear axle, the pinion will turn 4.10 times for every single turn of the ring gear or in other words, for every 4.10 turns of the driveshaft, the rear wheel will spin once.
What is the difference between a 8 inch and a 9 inch rear end?
To sum it all up, the 8- and 9-inch rears share the same basic design, they look similar, and have a lot of gear ratio and brake options to choose from, but the 9-inch is stronger. So why would anyone choose an 8-inch? That’s a good question with a simple answer-weight.
What does an 8 3 4 rear end mean?
Available as original equipment in many Chrysler cars over all platforms, the Mopar 8 3/4; is a strong rear axle assembly that is highly adaptable as a donor component. Originally introduced by Chrysler in 1957, the 8 3/4; rear was used in Chrysler car and Dodge truck and van chassis until 1974.
How wide is a Ford 9 inch axle?
These axles are 65 inches wide from wheel mounting surface to wheel mounting surface (a 68-inch-wide E-series van version is also common), feature the legendary 9-inch diameter ring gear, large Timken set 20 axle bearings, semi-floating 28- or 31-spline axleshafts, drum brakes, and a 5-on-5.5 lug pattern.
How wide is a 68 Mustang rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
Vehicle Application | Axle Width (inches) |
---|---|
’65-’66 Mustang | 57 11/44 |
’67-’70 Mustang 8.0 | 59 51/48 |
’71-’73 Mustang | 61 11/44 |
’67-’71 Comet, Cougar | 59 11/44 |
How wide is a GM 12 bolt rear end?
The GM 8.875-inch, 12-bolt positraction came in many 1965 to ’72 passenger cars. The pinion shaft on passenger cars’ differentials was 1.625 inches in diameter, and the cover was oval, measuring 10.9375 inches wide by 10.625 inches tall.
How do you narrow a 8.8 Mustang rear end?
The Explorer 8.8 is narrowed by cutting out 2.875 inches from the driver’s side axle tube, welding it back together, and installing a separate passenger side axle in the now shortened driver’s side axle tube.
What Mustangs have 8.8 rear end?
Then, from 1986-2010, the Ford Mustang 8.8 rear end went into all V8 Mustangs, and the Ford 7.5” rear end now went into all 4-cylinder (2.3L) up to 1993 and V6 Mustangs (3.8L). Every version and model of the Mustang from 2011 to the current 2022 Mustang received an 8.8 rear end.
Contents