What Kind Of Oil Does A Ford 4.6 V8 Take?

Published by Jennifer Webster on

5W-20 synthetic blend motor.
For the 4.6 engine, Ford recommends that you use 5W-20 synthetic blend motor oil. Let’s break that down a little. The numbers indicate the viscosity (thickness) of the oil, while the W means winter.

What kind of oil does a 4.6 F150 need?

SAE 5W-20 Synthetic
SAE 5W-20 Synthetic Blend Motor Oil(U.S.) SAE 5W-30 Synthetic Blend Motor Oil(U.S.)

How much oil does a Ford F150 4.6 take?

6 quarts
6 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.

What kind of oil does a 1999 Ford F150 4.6 take?

5W-20 (All TEMPS) – This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity.

What kind of oil goes in a 4.6 2007 F-150?

5W-20 synthetic oil
The owner’s manual recommends you use 5W-20 synthetic oil for this truck.

Can I use 5w30 instead of 5w20 in my Ford?

If you use 5w30 oil instead of 5w20 when it is not recommended or approved by your owner’s manual, it can void your car’s powertrain warranty, reduce engine efficiency, and possibly even damage your engine in the long run. Hopefully, this helps!

Can I use 10W30 instead of 5w20 in my Ford?

10W30 is thicker and protect older engine with its sealing capability. 5W20 is thinner multi-grade oil that is pertinent for quick starts in the lowest temperatures. In order to protect your car from internal damages, it is beneficial to use only specified engine oil by the manufacturers.

What oil does Ford use from the factory?

Motorcraft®
Ford recommends using Motorcraft®* motor oil for your Ford vehicle.

How much horsepower is in a 4.6 V8?

The Ford 4.6L V8 was produced from 1990 through 2014 and has been used in many different vehicles over the years. The horsepower figures from the engine range from 205 through 302 horsepower depending on the vehicle it was in. The horsepower figures also typically increased over the years.

Does Ford 4.6 have spark plug problems?

The Ford modular engines have had their share of spark plug issues. One of the issues was stripped or missing threads in the spark plug holes of 4.6-liter, 5.4-liter, and 6.8-liter 2-valve engines.

Is the f150 4.6 V8 a good engine?

Is the Ford 4.6L V8 engine reliable? Yes, we believe this engine earns above average remarks for reliability. There is a reason Ford stuck with the 4.6 V8 in so many flagship cars like the Mustang GT, F-150, Police Interceptor, etc. The Ford 4.6 engine offers a great balance of performance and reliability.

What oil does a 2003 f150 4.6 take?

Create an Oil Change Kit

Capacity 6 quarts (with filter)
Viscosity 5W-20 (All TEMPS)
Torque 10 ft/lbs (Oil Drain Plug)

What kind of oil does a 2000 Ford f150 4.6 take?

Notes: OE Recommendation, Conventional High Mileage. 5W-20.

What’s the difference between 5w30 and 5w20?

5w20 is a thinner oil that is designed for newer, high-performance engines. On the other hand, 5w30 is a thicker oil that is better suited for older engines. Using the wrong oil in your engine could reduce performance and wear and tear. So, check your owner’s manual to see which oil is recommended for your car.

What kind of oil does a 1998 Ford f150 4.6 take?

5W-20 (All TEMPS) – This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity.

What oil does a 2004 Ford f150 4.6 take?

Motorcraft SAE 5W-20 motor oil
What kind of oil does a 2004 Ford F-150 4.6 need? The owner’s manual for the 2004 Ford F-150 4.6 recommends that owners use Motorcraft SAE 5W-20 motor oil when performing an oil change.

Do Fords need synthetic oil?

High performance cars like the Mustang as well as turbocharged engines across the Ford lineup typically require synthetic engine oil. If your car doesn’t require synthetic oil, the choice is yours to make.

Is 5W-20 or 30 better?

You’ll get better protection with 5W 30 oil in cold as well as hotter climates. 5W-20 oil is best for those who live in colder climates with low temperatures. It can be used for light-duty applications, for engines that do not reach very extreme temperatures.

Is 5w30 thicker then 5w20?

Let’s look at 5W-20 vs 5W-30 again. The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film.

Will the wrong oil damage my engine?

Cause damage to engine life
The wrong engine oil can cause engine damage because it does not properly lubricate its components. This will lead to metal-on-metal contact since the moving parts are not being lubricated. Friction quickly follows, causing engine parts to wear.

What happens if you put 5w30 instead of 10W30?

What is more, you can even use 5W30 oil instead of 10W30 in your generator or car engine, if needed. Both these types of oil have the same viscosity and this means that the oil will perform the precise same way once it reaches operating temperature and therefore can be used interchangeably.

Contents

Categories: Mustang