What Motor Is In The Terminator Mustang?

Published by Henry Stone on

4.6L.
The Terminator’s 4.6L Dual Overhead Cam (DOHC) V-8 engine went through quite the process before it was finally signed off for the masses. Although it was the first production Mustang with a supercharger, it was not the first Mustang to be developed by SVT with forced induction.

What engine did the Terminator Mustang have?

4.6L DOHC engine
Debuting in early 2002, the 2003 Cobra – nicknamed the “Terminator” – came with a supercharged 4.6L DOHC engine. The motor was underrated at 390 bhp (291 kW) at 6000 rpm and 390 lbf·ft (530 N·m) of torque at 3500 rpm. The true output of the motor was closer to 430 bhp.

Who makes the Terminator engine?

Ford
From a past episode of Fierce Ford Friday, host Kendra Sommer and Ron Hawkinson discuss the 2003-2004 Mustang Cobras that came with the “Terminator” engine, a 4.6L DOHC supercharged engine from Ford’s SVT division.

What type of motor is a terminator?

Cobra “Terminator” 4.6L 32V Supercharged V8 Engine Specs

Measurement Technical Specification
Displacement 4.6L/281 Cubic Inches
Compression Ratio 11.0:1
Engine Control Sytem PCM
Horsepower 390 @ 6,000 RPM

What is a Ford Terminator engine?

What is the engine in the Ford Mustang Terminator? The beating heart of the SVT Cobra Terminator was a 4.6L DOHC V8 with an Eaton M112 supercharger for forced induction.

What engine is in Ken Block’s 65 Mustang?

Running a naturally aspirated Roush Yates 410 ci Ford V8 engine initially, the Hoonicorn V1 only produced only 845 horsepower. Wanting to tackle Pikes Peak, Block knew he would have to compensate for the high altitude’s thin atmosphere and decided to bump up the power level.

How much HP does a Terminator Cobra make?

At the wheels, the dyno shows this Terminator making 370 hp (276 kW) at 6,300 rpm and 380 lb-ft (515 Nm) at 4,200 rpm.

What motor is in a Terminator Cobra?

The Terminator’s 4.6L Dual Overhead Cam (DOHC) V-8 engine went through quite the process before it was finally signed off for the masses. Although it was the first production Mustang with a supercharger, it was not the first Mustang to be developed by SVT with forced induction.

What does SVT Cobra stand for?

In 1993, Ford’s Special Vehicles Team (SVT) debuted the SVT Mustang Cobra.

What does SVT stand for Ford?

Ford Special Vehicle Team
The Ford Special Vehicle Team (SVT) was conceived in 1991, when Ford senior management recognized the corporate advantages of investigating niche vehicle market opportunities.

What does T stand for on a motor?

The “T” stands for turns. This is the number of times the wire inside the motor is wrapped around the stator. A smaller number of turns typically equals less resistance, and more power. A higher number typically means more resistance, and less power.

What is a voodoo motor?

The Voodoo is a 5.2-liter, naturally aspirated V8 engine from Ford Motor used to power sports cars like the Ford Mustang Shelby GT350/350R. Featuring a dual overhead cam (DOHC) design, in a V configuration, the Ford Voodoo architecture has been part of the Ford Modular family since 2015.

How strong is a T-800 Terminator?

The T-800 was also 20% lighter and 40% stronger than the T-600. The armored frame is capable of withstanding most contemporary weapons with small caliber and sometimes even withstanding a direct hit from grenade launchers.

What supercharger is on the Terminator?

Consisting of a strengthened iron block, Manley forged rods, and a screaming supercharger, its incredible engine made it a whole new machine. Thanks to that Eaton M112 supercharger, the Terminator was rated at 390 hp.

How fast is the Terminator Mustang?

The 2003 SVT Mustang Cobra came with a “Terminator” V8 engine. As ferocious as its name, the engine had a 390 HP with 390 pound-feet of torque. It could reach 0 to 60 in 4.8 seconds with a top speed of 155 mph.

Is the Terminator a 4 valve?

While the supercharged 4.6-liter 4-valve V8 found in the Terminator Cobra might share its displacement with other modular engine powered Mustangs of the past, the similarities between them end there.

How fast is the Hoonicorn 1/4 mile?

It’s a second-generation W20 built by BoostedBoiz. The car features a fully-tuned K-Series Honda engine with a massive turbo and about 1,300 horsepower output, clinching its speed record with a 7.982 seconds quarter-mile dash at 181.94 mph.

How much is the Hoonicorn V2 worth?

I bet it’s pricey, but how much is it actually worth? Reviewed by Shannon Martin, Licensed Insurance Agent. In 2021, the Hoonigan Ford “Hoonicorn” Mustang had a price tag of $1.1 million. The Hoonicorn is a custom drift car created by motorsport and lifestyle brand Hoonigan and rally driver Ken Block.

How did Ken Block make his Mustang AWD?

This 1965 Ford Mustang was built from the ground up to be All Wheel Drive. That is why Ken chose Vaughn Gittin’s team to work their magic. Starting in the virtual realm, the RTR team realized strength and safety are paramount. Therefore they chose carbon fiber body panels over a tube frame chassis.

Which Ford Mustang is the fastest?

The current Shelby Mustang GT500 is the fastest production Mustang ever made. It’s also the most powerful street-legal Ford ever. In all of its almost 60 years of production, this is the pinnacle of Ford’s performance and power.

How much is a 2003 Terminator Cobra worth?

Find a Used 2003 Ford Mustang SVT Cobra Near You
Prices for a used 2003 Ford Mustang SVT Cobra currently range from $24,999 to $54,980, with vehicle mileage ranging from 948 to 95,572.

Contents

Categories: Mustang