What Rear End Is In A 2004 V6 Mustang?

Published by Henry Stone on

The 7.5” rear end went into all 4 cylinders (2.3L) and V6 Mustangs (3.8L). The ’99-01′ & ’03-04′ Mustang SVT Cobras were equipped with an Independent Rear Suspension (IRS) that used the Ford 8.8” differential.

Do V6 Mustangs have 8.8 rear end?

Then, from 1986-2010, the Ford Mustang 8.8 rear end went into all V8 Mustangs, and the Ford 7.5” rear end now went into all 4-cylinder (2.3L) up to 1993 and V6 Mustangs (3.8L). Every version and model of the Mustang from 2011 to the current 2022 Mustang received an 8.8 rear end.

What rear axle does a Mustang have?

The Ford Mustang is one of the few vehicles that has used both a solid rear axle and an independent rear suspension in the modern era. For decades, the Mustang stood out as one of the only non-off-roading vehicles to feature a solid rear axle.

What kind of differential does a Mustang have?

Since then, limited-slip differentials have become a standard feature in Mustangs. GTs have had a standard limited-slip differential since 1986, and four and six-cylinder Mustangs have had one since 2011.

Is a 2004 Mustang a Fox body?

The fourth generation Ford Mustang is an automobile that was produced by the American manufacturer Ford for the 1994 through 2004 model years.
Ford Mustang (fourth generation)

Fourth-generation Mustang
Body style 2-door convertible 2-door fastback coupe
Layout FR layout
Platform Ford Fox-4 SN-95(1): 1994–1998 Ford Fox-4 SN-95(2): 1999–2004
Powertrain

How do I know if I have an 8.8 or 9.75 rear end?

Also you can tell by the diff cover shape. There’s pictures online. Basically if it’s symmetrical then it’s the 8.8. If it’s tapered on one side it’s the 9.75.

What years did Ford use the 8.8 rear end?

8.8 IRS (Independent Rear Suspension)
The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models.

What rear end does a 2003 V6 Mustang have?

The 7.5” rear end went into all 4 cylinders (2.3L) and V6 Mustangs (3.8L). The ’99-01′ & ’03-04′ Mustang SVT Cobras were equipped with an Independent Rear Suspension (IRS) that used the Ford 8.8” differential.

Is 3.55 or 3.73 better?

3.55 gears will give you better gas mileage while 3.73 gears give you better acceleration and performance.

What year Mustangs have limited-slip differential?

We offer Limited Slip Differentials for any 1979 – 2014 Mustang. So replace your worn out rear differential today.

How do I identify my rear differential?

The most accurate differential identification is provided by the bottom line of the tag number or axle tube stamp. Differential tags can easily be used to identify Dana and Ford differentials.

How can you tell if you have 3.73 gears?

if the driveshaft turned 3 3/4 revolutions for two rotations of the tire, you have a 3.73 gear.

Did they make a V6 Fox-body Mustang?

However, it is fascinating that the Fox Body was available with a V6 engine option. Most Fox Body Mustangs have either a 5.0 V8 or the 2.3 four-cylinder today. The GLX was available as either a manual or with a three speed C5 automatic.

Can you Coyote swap a Fox-body?

Yes, you can Coyote swap your Fox Body Mustang.
This is a very popular engine swap for the 1979-1993 Mustangs thanks all of the aftermarket components that are on the market now.

What does Fox-body stand for?

The Fox Body was produced from 1979-1993, the longest stretch for any Mustang generation. It earned its “Fox Body” nickname because it was built on the Fox platform. These Mustangs are well-known for being a modder’s dream, and with just a few upgrades they can hold their own with more modern ponies.

What has a 8.8 rear end?

First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from ’86 on, and in V6 Rangers and Explorers. There are 24 different Fords that offered the 8.8 rear axle. The weakest points of the 8.8 are the 28-spline axles (1.18 inches in diameter).

Is a Ford 8.8 rear end strong?

This rearend is lighter than a 9-inch and is as strong as a 12-bolt (except for the axles), and many Mustangs came from the factory with Traction-Lok limited-slip differentials.

How do I know if I have a 8.8 axle?

The 8.8-inch pinion shaft is 15/8 inches and has 30 splines. A Ford identifying tag is attached to one of the rear cover bolts. The four-letter code on the top right of the tag will be a dead giveaway as to whether you have found an 8.8-inch axle.

Is the Ford 8.8 a good axle?

Although not serving up the same beef as the respected Ford 9-inch, the slightly smaller 8.8-inch has held its own as a good medium-duty wheeling axle, especially when used on lighter rigs. The axleshafts have been available in 28- and 31-spline counts.

What Fords had a 9-inch rear end?

Common applications

  • 1957-1986 Ford F-100 & F-150.
  • 1958-1960 Edsel (All series including Wagons)
  • 1976-1980 Ford Granada.
  • 1976-1979 Lincoln Versallies.
  • 1957-1970 Ford Fairlane.
  • 1957-1971 Ford Thunderbird.
  • 1964 1/2-1973 Ford Mustang.
  • 1966-1983 Ford Bronco.

What is the best Ford rear end?

The 9-inch Ford Rearend is the Strongest Rearend Out There—It’s All Due to “Hypoid Distance” 1] The 9-inch Ford has no differential case gear-ratio range restrictions; one differential accepts all gear ratios from the 2s through the 6s.

Contents

Categories: Mustang