What Transmission Is In A 1989 Ford Mustang?
In all 1989 models equipped with a 4 cylinder engine the 5-speed manual was standard equipment and and a 4-speed automatic was optional.
What transmission is in a Foxbody Mustang?
The TKO-500 is a 5 speed overdrive transmission introduced in 2004 to replace the TR-3550. Rated for 500 ft-lbs of torque, the TKO-500 is very stout. There are two models available. One comes with a 10-spline input shaft and one with a 26-spline input shaft.
What year Mustangs had a T5 transmission?
1983
In 1983, T5’s were introduced to Fox body Mustangs and continued to be used in V-6 Mustangs until 2010. The T5 is the longest running five speed overdrive, standard shift transmission spanning more than 30 years of production.
What Mustangs came with a T45 transmission?
The Borg-Warner T45 was introduced in 1996 when the Ford 4.6L Modular motor was released. These transmissions were only used behind 4.6L single and dual overhead Mustangs from 1996 to 2001.
What transmission was in a 88 Mustang?
It is also important to note that the 1987-88 5.0L LX notchbacks with 5-speed transmissions were the fastest Mustangs of the Fox era (other than the 1993 Cobra).
What year Mustang has a T56 transmission?
The Ford Performance Tremec Magnum T56 6-Speed Manual Transmission is designed for use in the 1999 to 2004 Mustangs equipped with a small block Ford 4.6L SOHC/DOHC or 5.0L Ti-VCT V8 engine.
What transmission goes with a 302?
For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.
How do I know if my Mustang is a T5 transmission?
The identification number for a T5 is usually only found in 2 locations. A metal tag can be found on the driver’s side of the case and is held down by one of the tailhousing bolts. There is also a paper tag (sometimes covered with clear plastic) on the case cover.
What year did V8 Mustangs stop using T5?
Ford stopped using the World Class T5 in V8-powered cars after 1995, but it would live on in the V6 Mustang until 2010.
How do you tell if a transmission is a T5?
The front of the Transmission will have a bearing cover located just below the Input shaft. This cover will be round and either has the word ‘Timken’ or some other letters on it. If the cover has no writing on it it is a Non-World class… this is true for all Tremec T5 assembly part numbers.
Is the T 45 A good transmission?
Conclusion: T-45 Transmission
While the Tremec T45 transmission bellhousing design limits its use to 1996 – 2010 Ford 4.6L and 2011 Ford 5.0L/5.4L applications, the Ford T-45 transmission is quite capable of handling high torque output, while delivering smooth shifting and long-term durability.
What Mustangs have a T5 transmission?
The T5 can be found behind:
1983 to 1993 Ford Mustang LX and Mustang GT 5.0L V8. 1993 Ford Mustang Cobra and Cobra R 5.0L V8. 1994 to 1995 Ford Mustang GT and Cobra 5.0L V8.
What years did Ford use the T18 transmission?
The T18 is a renowned, heavy-duty truck transmission designed for and used in ½, 3/4 and 1+ ton trucks. The T18 was made by Borg-Warner Gear from 1965 to 1991. They are found in Ford, Jeep and IH trucks.
What is a C4 Mustang transmission?
The C4 is a simple automatic transmission with separate bolt-on bellhousing for six and small V-8 applications. There’s also a big-block C4 for 385-series and 351/400M engines. For ’67, the C4 became the “Select-Shift” with a conventional P-R-N-D-2-1 shift pattern and a new valve body.
What kind of transmission is a 4 L 80 E?
automatic transmissions
The 4L80-E (and similar 4L85-E) is a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series included 4 forward gears. It was the 4-speed electronically commanded evolution of the 3-speed Turbo-Hydramatic 400, first produced in October 1963.
What years did Ford use A4LD transmission?
It was produced through 1986 and was completely replaced by the AOD. The A4LD four speed overdrive transmission was introduced in the 1985 Bronco II/Ranger and saw use behind many 4 and 6 cylinder engines until the 1995 model year when it was replaced by the 4R44E and 4R55E electronic transmissions.
What Fords came with a T-56 transmission?
The T-56 transmission is a six-speed manual transmission designed for high-performance vehicles. Though it was first used in the Dodge Viper, it was also used in two fabled Mustang models: The 2000 Cobra R and the Terminator Cobra.
What Fords came with T-56?
Transmission Type | Vehicle | Service Offered |
---|---|---|
T56 | 1979-2004 Ford Mustang | Level 1 – Level 5 |
T56 | 2003-2004 Cobra | Level 1 – Level 3 |
T56 Magnum XL | 2005+ Ford Mustang GT | Level 1 – Level 5 |
TR-6060 & Magnum XL Conversion | 2007-2014 Mustang Shelby GT500 | Level 1 – Level 2 |
How do I know if I have T-56 or TR6060?
For the T56, you will realize that the shifting handle is behind the transmission. The TR6060, in some models, is around 2-inches back from the transmission, which seems more complicated. The TR6060’s -shifter may be atop a tripod-like platform, whereas, you have the T56’s integrated into the bell housing’s frame.
How much HP can a stock 302 handle?
Its under-plenum air gap makes for hard cold-starts, but a car driven only in warm weather could become King of the Windsors. Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp. The vaunted 289 High-Performance engine was said to make 271 hp.
How do I identify a Mustang transmission?
Mustang Transmission Tags
- The transmission tag is located on your driver’s side door jam.
- On the bottom right of the tag there is an area labeled TR with 5 letters and numbers.
- Only the first letter/number corresponds to your transmission.
Contents