What Transmission Will Fit In A 66 Mustang?

Published by Henry Stone on

For a 1965 – 1966 Mustang we recommend a T5 transmission for engines making under 450hp.

What transmission works with a 302?

For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.

Will a Tkx fit in 66 Mustang?

It is priced competitively, compared with the proven TKO, and what’s more, it will fit your Mustang regardless of generation. The TKX is truly a better five-speed transmission with a streamlined case to fit any 1965-04 Mustang without transmission tunnel modifications.

What transmission is in a 1966 Ford Mustang 6 cylinder?

Standard engine for the Mustang continued to be the 200ci six-cylinder with the three-speed manual transmission.

What Mustang comes with a T56 transmission?

The Ford Performance TREMEC T56 6-Speed Transmission is for use with 999-2004 Mustangs equipped with a small block Ford 4.6L SOHC/DOHC or 5.0L Ti-VCT V8 engine.

Will a T5 transmission bolt up to a 302?

This Deluxe T5 Transmission Conversion Kit will fit your 1969 Mustang with a 289, 302 or 351 Engine. To accomplish the conversion, the kit utilizes the late model bellhousing and cable linkage setup.

What year 302 had most horsepower?

The most powerful variant of the 5.0 HO came in the 1993 Ford Mustang SVT Cobra, with an impressive 235 horsepower rating. The use of the 5.0/302 V8 in production vehicles ended with the model year 2001 Ford Explorer. The final variant in the explorer had 215 horsepower.

Can you put a T56 in a Mustang?

The MDL T-56 Magnum XL conversion package for the 2005-14 Mustang is an easy weekend install because Modern Driveline has thought of all of it for you. This installation has been executed and photographed to show you how easy the installation is and what it will mean for your S197 Mustang driving experience.

What rear end will fit a 1966 Mustang?

65-66 Mustangs come with the 7.25″ rear end, non-removable carrier.

What does a T56 transmission fit?

In recent times, the T56 transmission has become synonymous with LS-powered Pro Touring builds, but it actually debuted in the 1992 Dodge Viper and 1993 Camaro Z/28. It eventually replaced the ZF six-speed in the Corvette when the C5 was developed using a transaxle arrangement.

What cars use t5 transmission?

Applications

  • 1982-83 AMC Spirit.
  • 1982-83 AMC Concord.
  • 1982-88 AMC Eagle.
  • 1982-86 Jeep CJ-7.
  • 1984-86 2.5L Inline 4, 2.8L V6, and turbo diesel Jeep Cherokee XJ/Comanche MJ.
  • 1984-86 Ford Mustang SVO (World-Class T-5 1985-1986)
  • 1983.5-1995 V8 Ford Mustang (World-Class T-5 1985-1995)

What is a 1966 6 cylinder Mustang worth?

We however are taking a look at the classic 1966 Ford Mustang of which examples are worth between $18,000 and $110,000. This however is split between the less desirable hardtops in the lower end of the spectrum while convertibles and limited-run special editions sitting on top demand a premium.

Are all 6F35 transmissions the same?

Are all 6F35 transmissions the same? No, not all 6F35 transmissions are the same. Throughout the years, Ford and GM produced different variations of the transmission for different vehicles. For example, the 6F35 transmission that goes in the 2016 Ford Explorer is a 2.3 L transmission.

How much HP can a T56 handle?

However, even the best over-the-shelf manual transmissions are only rated to handle 700 hp. In an effort to save the manuals, we contacted Tick Performance of Mount Airy North Carolina to see inside their Stage 5 Tremec T56 Magnum transmissions. They claim this fully synchronized six-speed is good for 900 rwhp.

What transmission is better than a T56?

By now it is obvious that the TR6060 is better in weight handling than the T56. There are several factors behind this, one of them being the structure of the input shaft. The TR6060’s input shaft has larger bearing hardware.

How much does a T56 cost?

Simply put, a Tremec T56 or TR6060 rebuild starts at $1,899.99, but depends on the vehicle application and level/horsepower rating (see options below).

What year Mustangs had a T5 transmission?

1983
In 1983, T5’s were introduced to Fox body Mustangs and continued to be used in V-6 Mustangs until 2010. The T5 is the longest running five speed overdrive, standard shift transmission spanning more than 30 years of production.

Will a T5 transmission fit a 65 Mustang?

1965 – 66 Mustang
A T5 swap in these cars is straight forward whether swapping an automatic or a Toploader. Even the inline-6 transmissions can be swapped with a T5. The only modification needed to install a T5 is to clearance the right side of the shifter opening by 3/8″.

What year Mustangs have T5 transmission?

You can think of the five-speed transmission gamut for Fox and SN-95 Mustangs in three general ways. First, there are the legions of T5 variants used in all Mustangs from 1983 to 1995.

How do you get a 600 hp out of a 302?

Yes, you can get 500–600 HP from a flat tappet 302 that will run on pump gasoline (91–93 octane).

  1. Build the bottom end with forged pistons, rods, and crankshaft.
  2. Add a twin screw supercharger with an effective intercooler and run 12-14 pounds boost and adjust the fuel mixture and timing appropriately to the build.

How much HP can a stock 302 crank handle?

Standard Ford 289 and 302 small-blocks were factory-rated between 200 and 230 hp.

Contents

Categories: Mustang