When Did They Stop Making The 4.6 Mustang?

Published by Clayton Newton on

The Two-Valve 4.6L would remain largely unchanged through 2004, after which it was phased out of the Mustang for the Three-Valve 4.6L engine. Ford continued to use the Two-Valve in many of its other models for years to come.

What Mustang has a 4.6 L V8?

The first production Modular engine was the 4.6 L 2-valve SOHC V8 and was seen on the Ford Mustang GT in 1996 through 2004 in several iterations.

When did they start putting 5.0 in Mustangs?

The 5.0-liter name was first applied to the third-generation “Fox-Body” Mustang that debuted in 1979. Because of its tuning potential, the 5.0 name became a synonym for cheap horsepower. Ford first retired the 5.0-liter V8 for the 1996 Mustang, which used a then-new 4.6-liter design, but brought it back for 2011.

How much HP does a 4.6 V8 Mustang have?

Engine specs
304 Hp @ 6000 rpm. 427 Nm @ 4500 rpm. 314.94 lb. -ft.

Does Ford still make 4.6 V8?

It may have taken the better part of 15 years, but the Ford 4.6 Modular V8 did eventually find its footing in the end, with the manufacturing of the Panther platform there-in not ceasing until 2011, before one last hurrah in an E-Series van in 2014.

Is the 4.6 A coyote engine?

The latest version of Holley’s Terminator X and Terminator X Max is aimed at 2011-2017 Coyote engines, along with 4.6 and 5.4 Two-Valve and Four-Valve engines.

Are all Ford 4.6 engines the same?

There are three versions of the Ford 4.6-liter engine. Despite the differences, they all share a few things. For one, the bore and stroke of every 4.6-liter Modular V8 are the same. As mentioned before, they have a one-to-one ratio with a 90mm bore and 90mm stroke.

What does GT mean on a Mustang?

grand touring
GT stands for gran turismo, or “grand touring.” Although the Italian who originally thought up the term gran turismo, or GT, has been lost to history along with their reasoning, the definition was clear: A GT car fit between a sports car and a luxury car.

What are the rarest Mustangs?

17 of the Rarest Mustangs: How Many of These Classics Do You Remember?

  • 1964 World’s Fair Skyway Mustang.
  • 1964 Indy Pace Car Replica.
  • 1965 Shelby Mustang GT350.
  • 1967 Indy Pacesetter Mustang.
  • 1967 Ford Shelby GT500 Super Snake.
  • 1967 Ford Shelby GT500 Convertible.
  • 1968 Ford Shelby EXP500 “Green Hornet”

Is a 4.6 L V8 engine fast?

While the 4.6L engine wasn’t designed for a supercar by any means, it was noticeably faster than similar engines of the past. The 4.6L went from 0 to 60 mph 1.5 seconds faster than the popular 5.0L (302 ci) V8 engine, used in comparable vehicles of the past.

How much horsepower can a 4.6 handle?

4.6L Mustang Engine Power Limits
For 4.6 engines with 2 valve heads (2 valves per cylinder), the power limit is around 400 rwhp.

Can you supercharge a 4.6 Mustang?

462HP – The complete system will boost your stock 4.6 GT to 462HP and 419 LB/FT Torque with 10 PSI from the V-3 Si-Trim Supercharger at factory redline using CA 91 Octane fuel.

What year 4.6 had the spark plug problems?

2004-2008
This article describes a particularly frustrating spark plug issue with the 2004-2008 Ford 4.6-liter, 5.4-liter, and 6.8-liter 3-valve “modular” engines.

How many miles is a 4.6 V8 good for?

It seems that they either seize before they get off of the transport truck (brand new) or run 200,000 miles with regular service. The 4.6L engines I work with are serviced religiously and run well over 150,000 mile in SEVERE service. The car wears out long before the engines do. 35 people found this helpful.

What year did 4.6 go to 3V?

The 4.6-liter 3V engine was available in the Ford Mustang beginning in 2005 and produced 300 horsepower and 320 lb-ft of torque from the factory. It got a small bump in power in 2010 to 315 horsepower and 325 lb-ft of torque before the Coyote’s introduction in the 2011 model year.

Is a 4.6 and a 5.4 the same block?

All 4.6L and 5.4L SOHC Modular engines employ the same basic blocks, meaning you can bolt any SOHC 3V head on any Romeo or Windsor block, which gives you a lot to choose from.

How much HP does a supercharged 4.6 have?

Supercharged 4.6L V8 = 500+ Horsepower.

What is a 4.6 Ford engine equivalent to?

The 4.6 liter engine was the replacement for the Windsor family of Ford V8’s. Having been introduced in the 1962 Ford Fairlane as the 221 cubic inch V8, the Windsor engines would ultimately be found in many familiar sounding sizes (289, 302, and 351) and would power everything from Falcon’s to F-350’s.

Does the 4.6 have spark plug issues?

However, Ford 4.6L V8 engines do have a few known spark plug issues. The 3-valve 4.6 engine in some Mustang GT and F-150 models runs into issues with spark plugs breaking in two. This makes removing the spark plug(s) very challenging when they break.

What year Fords have the spark plug problem?

Between 2004 and 2007, Ford made several 3-valve engines that had the unfortunate habit of refusing to give up their spark plugs.

What does K code Mustang mean?

The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.

Contents

Categories: Mustang