Where Is The Vin Number On A 1973 Mustang?

The 1973 Mustang VIN number can be found on top edge of the dash on the driver’s side visible through the windshield.

How many digits is a 1973 VIN?

The most common VIN format is the 17-digit VIN, which became standard for all vehicles manufactured since January 1981. Vehicles manufactured prior to 1981 may have as few as 5 digits to as many as 13 digits.

What is the value of a 1973 Mustang?

Prices rose slightly, with the Hardtop costing from $2,760; Fastback at $2,820; Convertible at $3,102, Grande at $2,964, and Mach 1 at $3,088.

What is a 1973 Q code Mustang?

Cobra Jet is Ford’s catchword for performance. While most of us apply the term to the tire-smoking big-blocks of the ’68-’71 era, under the hood of Mike’s Mach is the Q-code 351 four-barrel, commonly called the 351 Cobra Jet, which took over the reigns as the hottest engine in the Mustang stable for ’73.

How many VIN numbers are on a Mustang?

The standard 17-digit VIN has been added to all Mustangs since the 1981 model year.

Where is VIN usually located?

dashboard
The VIN can often be found on the lower-left corner of the dashboard, in front of the steering wheel. You can read the number by looking through the windshield on the driver’s side of the vehicle. The VIN may also appear in a number of other locations: Front of the engine block.

How do I find the 13 digit VIN number?

Choose the Best Way is using TOP rated Background search services:

1. FindSomeone – search people all around the world.
2. PhoneSearcher – phone search & lookup.
3. Emailer.
4. VIN Search – Vin number lookup.
5. License Plate Search – find car owner by license plate.
6. Death Records – find death records.

How do I find an old VIN number?

You can get a free VIN check at the National Insurance Crime Bureau (NICB), VehicleHistory.com or iSeeCars.com/VIN. Just pop in your car’s digits and these sites will do the VIN lookup and give you information on the vehicle.

How long were VIN numbers in the 70’s?

In the late 60s and early 70s, VIN numbers started to get a little longer (typically 13 characters) and more manufacturers started to encode engine type and body style.

How many Mustangs were made 1973?

1973 Ford Mustang Overview
Due to government regulations, the 1973 Mustang would be the last Mustang convertible until 1983 and it would be the last year for Mustang Grande also. In its final year, there were a total of 134,867 Mustangs produced.

What engine came in a 1973 Mustang?

The 302 cubic inch Windsor V8 engine continued to be available in the Mustang in 1973, little changed from the prior year engine. The 302 was still marketed as the “302 cu in (4.9 L) Windsor V8, 2-barrel Autolite 2100” and was the base Mustang V8 engine.

What was the fastest car in 1973?

The fastest muscle car of 1973 was the Pontiac Tran Am powered by a 455 V-8 with 8.4:1 compression, 290 horsepower, and 395 lb-ft torque. In the June 1972 issue of Hot Rod magazine, a 73 Trans Am 455 SD ran a best of 13.54 seconds at 104.3 miles per hour in the quarter-mile.

What does K code Mustang mean?

The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.

What does C code mean Mustang?

C code – The C engine was the base V-8 Windsor, 200-hp engine for 1965 to 1968. It was the V-8 engine but without the expensive, high-performance upgrades. D code – The rare 210-horsepower 1964-and-a-half Mustang engines offered the four-barrel V-8 but lacked high-performance internals.

What does J code Mustang mean?

For many enthusiasts and collectors, the ‘holy grail’ of first-generation Mustang models are the fabled ‘J-Code’ cars, produced for one year only between 1968 and 1969. These cars represent the changeover period between the ‘small block’ 289ci V8 to the 302ci ‘big block’ engine.

Is there a 12 digit VIN number?

Every VIN number should: consist of 17 characters
It usually consisted of 11 characters, but depending on a manufacturer, the serial number could also consist of 5 or 9 characters.

What are the 2 most important VIN numbers?

The first three digits of a vehicle’s VIN make up the World Manufacturer Identifier (WMI). The first digit defines the country of origin or the final point of assembly of your vehicle. The second digit indicates the manufacturer and the region where your vehicle was produced.

How many VIN locations are on a car?

Driver’s Side Door – The VIN may be written on the doorjam or the door post. With the Wheels – The rear wheel well (directly above the tire) or underneath the spare tire are two possible VIN locations. Front of the Engine Block – If you open the hood, the VIN may be written on the engine block.

How do I find my car’s VIN number without the car?

You can find the VIN on the title document. It will appear in different places, depending on your state, but should be on the front of the title near the top. Find your registration card. The VIN should also appear on the front of your registration card.

How does a VIN look like?

Autozone.com explains that a VIN is normally printed on a single line and consists of 17 characters that are made up of both numbers and letters. If your vehicle was manufactured before 1981, your VIN number may have fewer than 17 characters.

When did 13 digit VIN start?

1954
All vehicles were required to have them beginning in 1954. But, it wasn’t until 1981 that the National Highway Traffic Safety Administration standardized the way that VIN numbers were assigned. Prior to this standardization, many vehicles had 13-digit VIN numbers.